Thermador VCIN42GWS Installation Instructions - Page 20
Installing grease trays and, filters
View all Thermador VCIN42GWS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installing grease trays and filters b) Filters - start with inserting the filter in the middle and work out to the ends. Slide the filter up, toward the front of the hood, then push down on top of the grease tray. -- The 8" filter must be installed in the center of hood at all times. 1 6 2 3 5 4 (1) LED lights (3) Baffle filters (5) Grease tray trough (2) Touch control panel (4) Grease trays (6) Filter spacers 2 3 Install filters and grease trays NOTE: DO NOT use burners, elements, or oven while hood is disassembled. 1. Turn the fan and lights off. 2. Remove all plastic from hood pieces. 3. Insert in the following order: a) Grease tray - Insert in rear tray. Grease trays must be in place before installing the filters. Push the grease tray in and down inside the grease tray trough. -- The small grease tray must be installed in the center of hood. 1 c) Filter spacers - If applicable, insert the filter spacers on the left and right ends. Push up, slide toward the front of the hood, then push in at the bottom. Reverse the above directions to remove the grease trays and filters. Ensure filters are cool and grease has congealed before removal. Page. 20