Timex T309TT User Guide - Page 11

Operating the Alarms (Continued) Setting the Buzzer Alarm 1. Press and hold the Ƹ Buzzer Alarm Button until the alarm setting appears on the display. 2. Press the µ Reverse or ƹ Forward Button to set the alarm time. 3. See Step #4 in the Setting the AM/FM Radio Alarm section for instructions on setting the Buzzer Alarm's 7-5-2 Advance Alarm. 4. After you have programmed the buzzer alarm, press the ƺ Enter Button or wait ten seconds to return to the clock display. The Buzzer Alarm Indicator will appear on the display, showing that the alarm is set. Checking Your Alarm Time Settings To check any of the three alarm settings, press one of the Alarm Buttons twice so that the settings appear on the display. The display will return to the standard clock display after a few seconds. After you have checked the setting, be sure the Alarm Indicator still appears on the display, so that the alarm will sound. Turning Off the Alarms 1. After the alarm sounds, press the ³ Off/Reset Button to turn off the alarm while still maintaining the programmed 7-5-2 Advance Alarm settings. To turn off an alarm and cancel its 7-5-2 settings, press its Alarm Button so that its Alarm Indicator no longer appears on the display. 2. If the ³ Off/Reset Button is not pressed, the alarm will sound for an hour before stopping. As long as an indicator appears on the display, the alarm will sound according to the 7-5-2 Advance Alarm settings. 3. To activate the snooze feature, press the ¿ Snooze/Dimmer Bar when the alarm sounds. The alarm will shut off for approximately nine minutes before sounding again. The feature can be repeated several times during the one-hour snooze cycle. 11