Timex T609T User Manual - Page 8
Installation and Maintenance - cd alarm clock
View all Timex T609T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Installation and Maintenance Battery Backup Installation 1. Gently turn the unit over and open the battery compartment door. 2. Install 2 AA batteries. We recommend using an alkaline battery for longest dependable life. The battery will maintain the correct time in the event of power failure or accidental line cord disconnection, even though the display is darkened. 3. Close the battery compartment door, turn the unit right side up, and plug in the AC cord. Battery Backup System The backup batteries will maintain the time and alarm settings in the event of a temporary power interruption. If the power goes out, the CD, nature sounds and radio will not play and no display visible but the clock will continues to run. However, alarms will not be sound during power interruption. Battery Compartment If a power failure occurs and backup battery is not installed or dead, all settings will be lost. When the power is restored the display will read "12:00" and continue to run. Maintenance 1. Place the unit on a level surface away from direct sunlight or sources of excessive heat. 2. Protect your furniture when placing the unit on natural wood or wood with a lacquered finish. A cloth or other protective material should be placed between the unit and the furniture. 3. Clean the casing with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such as thinner or similar materials, are not recommended as they may damage the surface of the case. 4. If the unit is not to be used for a prolonged period, such as a month or longer, remove the batteries to prevent possible corrosion. Should the battery compartment become corroded or dirty, clean the compartment thoroughly and replace the battery. 7