Tineco FLOOR ONE S5 COMBO POWER KIT Instruction Manual - Page 21
Brush Roller Self-cleaning, Brush Roller Cover, ensure the water level in the CWT exceeds 40%.
View all Tineco FLOOR ONE S5 COMBO POWER KIT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
EN Brush Roller Self-cleaning 1. Place the appliance on the charging base after use, the sensor will auto-detect the level of dirt. 2. When you hear the voice prompt "please begin selfcleaning cycle," press the self-cleaning button and begin the process. 3. Once complete, you will hear the voice prompt "selfcleaning completed, please clean the Dirty Water Tank." At this point, the appliance will begin charging. Note: • Ensure the charging base is plugged in and the battery level is >15%. • Before self-cleaning cycle, please clean the DWT and ensure the water level in the CWT exceeds 40%. Brush Roller Cover ② ① Squeeze latches on the cover and pull upward to remove. click Rinse with water. When replacing, always latch the brush cover into place to avoid leakage. 19