Tissot CHRONOGRAPH LADY AND GENT User Manual - Page 3

ADD function, SPLIT-TIME function, Care and maintenance

Page 3 highlights

Quartz Chronographs * ADD function The ADD function enables you to measure consecutive events without having to reset to zero between each event. Each time recorded is simply added to the previous total. 1 START 2 STOP Readout 3 RESTART 4 STOP Readout 5 RESTART 6 STOP Readout X Reset counters to zero SPLIT-TIME function The SPLIT-TIME function enables you to stop the hands to read an intermediate time, without interrupting the timing operation. When you restart, the hands « catch up » the lost time. 1 START 2 SPLIT 1 Readout of time 1 (see fig. 2) - 5 minutes, - 4 seconds, - 6/10ths of a second 3 RESTART (catchup) 4 SPLIT 2 Readout of time 2 - 15 minutes, - 36 seconds, - 8/10ths of a second 5 RESTART (catchup) 6 STOP Readout of the last time (cumulative time) - 25 minutes, - 18 seconds, - 4/10ths of a second 7 Reset counters to zero Care and maintenance We would advise you to clean your chronograph regularly (except for the leather strap) using a soft cloth and warm soapy water. After immersion in salty water, rinse it in fresh water and leave it to dry completely. Do not leave it anywhere where it might be subjected to major variations in temperature or humidity, in direct sunlight or near strong magnetic fields. We would advise you to have your watch inspected every 3 to 4 years by an approved TISSOT ® representative or retailer. To benefit from the highest standards of service and to ensure your guarantee remains in force, please always contact an approved TISSOT ® representative or retailer. TISSOT ® Quartz chronographs benefit from the incomparable precision of quartz. Their power reserve usually enables them to operate for more than 2 years in continuous use. If you envisage not wearing your chronograph for several weeks or months, we would advise you to put it to one side with the crown pulled out into position II. This cuts the electrical power supply to the motor, thereby extending battery life considerably. Replacing the battery Once the battery has run flat, it must be replaced without delay by an approved TISSOT ® representative or retailer. Battery type: button-type zinc-silver oxide primary battery cell. Collection and treatment of end of life quartz watches* This symbol indicates that this product should not be disposed with household waste. It has to be returned to a local authorized collection system. By following this procedure you will contribute to the protection of the environment and human health. The recycling of the materials will help to conserve natural resources. * valid in the EU member states and in any countries with corresponding legislation. www.tissot.ch 3/3 127_EN / 12/09

  • 1
  • 2
  • 3

Quartz Chronographs
*
www.tissot.ch
127_EN / 12/09
3/3
ADD function
The ADD function enables you to measure consecutive events without having to reset to zero between each
event. Each time recorded is simply added to the previous total.
1
START
2
STOP
Readout
3
RESTART
4
STOP
Readout
5
RESTART
6
STOP
Readout
X
Reset counters to zero
SPLIT-TIME function
The SPLIT-TIME function enables you to stop the hands to read an intermediate time, without interrupting the
timing operation. When you restart, the hands « catch up » the lost time.
1
START
2
SPLIT 1
Readout of time 1 (see fig. 2)
- 5 minutes,
- 4 seconds,
- 6/10ths of a second
3
RESTART (catchup)
4
SPLIT 2
Readout of time 2
- 15 minutes,
- 36 seconds,
- 8/10ths of a second
5
RESTART (catchup)
6
STOP
Readout of the last time (cumulative time)
- 25 minutes,
- 18 seconds,
- 4/10
ths of a second
7
Reset counters to zero
Care and maintenance
We would advise you to clean your chronograph regularly (except for the leather strap) using a soft cloth and warm soapy water. After immersion in salty water,
rinse it in fresh water and leave it to dry completely.
Do not leave it anywhere where it might be subjected to major variations in temperature or humidity, in direct sunlight or near strong magnetic fields.
We would advise you to have your watch inspected every 3 to 4 years by an approved TISSOT
®
representative or retailer. To benefit from the highest standards of
service and to ensure your guarantee remains in force, please always contact an approved TISSOT
®
representative or retailer.
TISSOT
®
Quartz chronographs
benefit from the incomparable precision of quartz. Their power reserve usually enables them to operate for more than 2 years
in continuous use. If you envisage not wearing your chronograph for several weeks or months, we would advise you to put it to one side with the crown pulled out
into position
II
. This cuts the electrical power supply to the motor, thereby extending battery life considerably.
Replacing the battery
Once the battery has run flat, it must be replaced without delay by an approved TISSOT
®
representative or retailer. Battery type: button-type zinc-silver oxide
primary battery cell.
Collection and treatment of end of life quartz watches*
This symbol indicates that this product should not be disposed with household waste. It has to be returned to a local authorized collection system. By
following this procedure you will contribute to the protection of the environment and human health. The recycling of the materials will help to conserve
natural resources.
* valid in the EU member states and in any countries with corresponding legislation.