Tissot PRC 200 DANICA PATRICK 2013 User Manual - Page 3

Chronographs G15 * Simple timing The "simple timing" function enables you to measure isolated events. 1 START 2 STOP Time readout (as per example above) - 5 minutes, - 57 seconds, - 7/10ths of a second 3 Reset NB: Before each timing operation, the chronograph hands must be at their start points. If necessary, refer to the RESETTING THE COUNTERS paragraph. Notes : All the timing functions are available with the crown pressed into position I. On the Retrograde model, the "simple timing" function is no different from that on a standard chronograph, but the retrograde counter hand turns anticlockwise, from 9 o' clock to 3 o'clock. ADD function The ADD function enables you to measure consecutive events without having to reset in between. Each time is added to the previous total. 1 START 2 STOP Readout 3 RESTART 4 STOP Readout 5 RESTART 6 STOP Readout X Reset counters SPLIT-TIME function The SPLIT-TIME function enables you to stop the hands to read an intermediate time, without interrupting timing. When you restart, the chronograph hands "catch up" to the ongoing elapsed time. 1 START 2 SPLIT 1 Time 1 readout (as per fig. 2) - 5 minutes, - 4 seconds, - 6/10ths of a second 3 RESTART (catchup) 4 SPLIT 2 Time 2 readout - 15 minutes, - 36 seconds, - 8/10ths of a second 5 RESTART (catchup) 6 STOP Final time readout (cumulative time) - 25 minutes, - 18 seconds, - 4/10ths of a second 7 Reset counters www.tissot.ch 3/4 144_EN / 12.09