Tissot QUICKSTER NATO User Manual - Page 3

Chronographs G10 * Simple timing The "simple timing" function enables you to measure isolated events. 1 START 2 STOP Time readout (as per example above) - 5 minutes, - 57 seconds, - 7/10ths of a second 3 Reset NB: Before each timing operation, the chronograph hands must be at their start points. If necessary, refer to the RESETTING THE COUNTERS paragraph. Note : All the timing functions are available with the crown pressed into position I. ADD function The ADD function enables you to measure consecutive events without having to reset in between. Each time is added to the previous total. 1 START 2 STOP Readout 3 RESTART 4 STOP Readout 5 RESTART 6 STOP Readout X Reset counters SPLIT-TIME function The SPLIT-TIME function enables you to stop the hands to read an intermediate time, without interrupting timing. When you restart, the chronograph hands "catch up" to the ongoing elapsed time. 1 START 2 SPLIT 1 Time 1 readout (as per fig. 2) - 5 minutes, - 4 seconds, - 6/10ths of a second 3 RESTART (catchup) 4 SPLIT 2 Time 2 readout - 15 minutes, - 36 seconds, - 8/10ths of a second 5 RESTART (catchup) 6 STOP Final time readout (cumulative time) - 25 minutes, - 18 seconds, - 4/10ths of a second 7 Reset counters www.tissot.ch 3/4 143_EN / 12.09