Tissot SEA-TOUCH User Manual - Page 12

SEA-TOUCH * CHRONO Resolution: 1/100 sec / Measurement range: 99 hrs 59'59'' and 99/100 sec 1 sec. Activate glass Chrono display Split (partial time) Start chrono Stop chrono Reset Start chrono a) Flashing stop with partial time displayed, and chrono running in background b) Restart the chrono counting the elapsed time Stop chrono Reset chrono WARNINGS Battery type: button-type lithium-manganese dioxide primary battery cell. Your TISSOT SEA-TOUCH is NOT a scuba-diving watch and the measurements of the TISSOT SEA-TOUCH are not of a professional or industrial precision. Your TISSOT SEA-TOUCH does NOT replace a professional dive computer. You can use the TISSOT SEA-TOUCH as a back up instrument only. Warning ! After each dive, please rinse and clean the watch thoroughly using only clear fresh water. Do not use any form of detergent. The pressure gauge shows a diving depth of up to 59 m / 189 ft. Even if you dive deeper, the display will continue to show a diving depth of 59 m / 189 ft. The maximum diving time that can be displayed and registered is 180 minutes / 3 hours. For your security do not dive deeper as international diving standards recommended: i.e. 30 m / 100 ft. www.tissot.ch 12/12 145_EN