Tissot T-TOUCH EXPERT SOLAR TOUR DE FRANCE 2016 User Manual - Page 7

T-TOUCH SOLAR E84 SWAP (TIME SWAP) > SETTING SWAP mode is used to switch from time T1 to time T2 and vice versa. For example: before setting off, you can set under T2 the local time zone for the country you are going to visit. 2 sec. or or SWAP mode display Setting mode "SWAP n" = No "SWAP y" = Yes SWAP (TIME SWAP) > EXAMPLE OF A TRIP ABROAD 10:10: Local time where you live / 18:10: Local time for the country you are going to visit. Validate setting Times T1 and T2 are swapped Mode "SWAP y" Mode "SWAP y" Outward trip The analogue display and time T1 indicate the time for the country you are visiting Time T2 indicates the time where you live Return trip The analogue display and time T1 indicate the time where you live Time T2 indicates the time for the country you are visiting SYNCHRO (SYNCHRONISATION) > SETTING ✓ Synchronised ✗ Desynchronised The watch needs to be synchronised if the watch hands do not display the same time as the digital display, or if they are not correctly superimposed when accessing the functions. The watch is desynchronised when its electric motor mechanism has been disrupted, by heavy impacts for example. NB: The glass must be active to access synchronisation mode. 2 sec. or or or or Synchronisation mode display Synchronisation setting mode The hands should be perfectly superimposed in the 12 o'clock position Position the minute hand at 12 o'clock Validate setting Position the hour hand at 12 o'clock Validate setting Back to Time T1 mode www.tissot.ch 7/21 154_EN