Tissot T-TOUCH II User Manual - Page 12
Thermometer, Sensor Fault, Warnings - battery change
View all Tissot T-TOUCH II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
T-TOUCH II THERMOMETER 1 sec. Activate glass Thermometer display * GLOSSARY > THERMOMETER Description of function In thermometer mode, your T-TOUCH displays the ambient temperature. Explanations The temperature displayed corresponds to that of the watch case, so this temperature is influenced by your body temperature. That is why the temperature displayed may differ from the ambient temperature. To display the actual ambient temperature, the watch needs to be taken off for 15 to 30 minutes, in order to be free from the influence of body temperature. Characteristics of function The temperature can be displayed in degrees Celsius [°C] or degrees Fahrenheit [°F]. (See procedure to follow for changing units on page 5). Conversion formulae: Measurement range: Accuracy: Resolution: T 0C = (T 0F -32) x 5/9 T 0F = T 0C x 9/5 + 32 -5°C to +55°C / 23°F to 130°F ± 1°C / ± 1.8°F 0.1°C/ 0.2°F SENSOR FAULT WARNINGS Battery type: button-type lithium-manganese dioxide primary battery cell. When a function is selected and the display is cleared, it is probably due to a failure of the selected function's sensor. 5 sec. To activate the functions on your T-TOUCH a gentle press on the push-buttons or touch on the glass is all that is required. Excessive force may damage the watch. The brightness of the digital display decreases when the hands are in motion. In fast continuous setting mode, the display moves at a faster rate (e.g. for date function: months or years instead of days) than in non-continuous or normal speed setting mode (e.g. for date: days instead of months or years). To exit fast continuous setting mode, you need to release the push-pieces for 3 seconds to continue in normal speed setting mode. Error: the display is cleared Back to date display If this happens, please contact your retailer. The T-TOUCH is water-resistant to 10 bar (100 m / 330 ft) at 25°C / 77°F, but it is not an instrument suitable for sports diving. You must not use push-buttons when the watch is underwater. None of the functions can be activated if the glass is in contact with a liquid. Additional information in the "International Warranty - Service centers" booklet www.tissot.ch 12/12 146_EN