Toshiba 19SLV411U User Manual - Page 19
Connecting a digital audio system - remote code
View all Toshiba 19SLV411U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Chapter 2: Connecting your TV Connecting a digital audio system The TV's DIGITAL AUDIO OUT terminal outputs a Dolby® * Digital or 2-channel down-mixed PCM (Pulse-Code Modulation) signal for use with an external Dolby® Digital decoder or other external audio system with optical audio input. You will need: • Optical audio cable (Use an optical audio cable that has the larger "TosLink" connector and not the smaller "mini-optical" connector.) Dolby Digital decoder or other digital audio system TV back panel To control the audio: 1無 Turn on the TV and the digital audio device. 2無 Press on the remote control and open the Sound menu. 3無 Press p or q to select Audio Setup and then press . 5無 Press t or u to select either Dolby Digital or PCM, depending on your device. ( "Selecting the optical audio output format" on page 40). 6無 To save the new settings, highlight Done and then press . To revert to the factory defaults, highlight Reset and then press . Note: •• Some audio systems may not be compatible with Dolby Digital bitstream signals. Older audio systems that are not compatible with standard optical out signals may not work properly, creating a high noise level that may damage speakers or headphones. THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY. •• The DIGITAL AUDIO OUT terminal may not output some digital audio sources because of copy restrictions. * Manufactured under license from Dolby Laboratories. Dolby, and the double-D symbol are trademarks of Dolby Laboratories. 4無 Press p or q to select Optical Output Format. 19