Toshiba 22LV505 Owner's Manual - English - Page 19

Connections Connecting to an amplifier equipped with a digital audio input 2 channel digital stereo You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker system (right and left front speakers). Note: PCM audio is limited to DVD or CD playback. Back side Amplifier equipped with a Digital audio input To COAXIAL DIGITAL AUDIO OUT To COAXIAL type digital audio input 75 Ω coaxial cable (not supplied) Note: • DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD. • Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the "COAXIAL" input of a Receiver or Processor. • Refer to the ownerʼs manual of the connected equipment as well. • When you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections. • The output sound of the TV/DVD has a wide dynamic range. Be sure to adjust the receiverʼs volume to a moderate listening level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound. • Turn off the amplifier before you connect or disconnect the TV/DVDʼs power cord. If you leave the amplifierʼs power on, the speakers may be damaged. Connecting to an HDMI or a DVI device About HDMI HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV, set-top boxes, and other AV devices. HDMI was developed to provide the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification. HDCP is used to protect digital content transmitted and received by DVI-compliant or HDMI-compliant displays. HDMI has the capability to support standard, enhanced, or highdefinition video plus standard to multi-channel surround-sound audio. HDMI features include uncompressed digital video, a bandwidth of up to 2.2 gigabytes per second (with HDTV signals), one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC. Back side To DVI output To PC AUDIO IN To HDMI IN DVI device Audio cord (not supplied) HDMI - to - DVI adapter cable (HDMI type A connector) or (not supplied) HDMI device HDMI cable (type A connector) To HDMI out (not supplied) Note: • You must select the corresponding audio input source (HDMI or DVI) on the menu screen (see "Selecting the HDMI audio input source" on page 41). Otherwise you will only see the image with no sound. 19 J50S0101A.indb 19 08.1.9 4:45:03 PM