Toshiba 27A34 Owner's Manual - English - Page 13
Adding channels to the TV, s memory, Changing channels - specifications
UPC - 022265213049
View all Toshiba 27A34 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Adding channels to the TV's memory Your TV will stop on specific channels that are stored in the TV's channel memory when you press Channel + or -. Use the steps below to set all active channels in your area automatically. Programming channels automatically Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory automatically, you can add or erase channels manually. To add channels automatically: 1. Press MENU, then press or to display the SETUP menu. 2. Press or until the TV/ CABLE selection is highlighted. 3. Press or to highlight either CH PICTURE AUDIO SETUP OPTION TV or CABLE, depending on which you use. TV / CABLE TV CABLE CH PROGRAM START ADD / ERASE ADD If you use an antenna, choose TV. If you use cable, choose CABLE. SELECT ADJUST 4. Press to select CH PROGRAM. 5. Press or to start channel programming. The TV will automatically cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory. While the TV is cycling through the channels, the message "PROGRAMMING NOW-PLEASE WAIT" appears. 6. When channel programming is complete, the message "COMPLETED" appears. 7. Press CH + or - to view the programmed channels. Adding and erasing channels manually After you have programmed the channels automatically, you can add or erase specific channels manually. To add or erase channels manually: 1. Select the channel you want to add or erase. If adding channels, you must select the channel to add using the Channel Number buttons. 2. Press MENU, then press or to display the SETUP menu. 3. Press or to highlight ADD/ CH PICTURE AUDIO SETUP OPTION ERASE. 4. Press or to select ADD or ERASE, whichever function you want to perform. 5. Repeat steps 1-4 for other channels you want to add or erase. TV / CABLE CH PROGRAM ADD / ERASE CABLE START ADD ERASE SELECT ADJUST Changing channels To change to the next programmed channel: Press Channel L or M on the TV or CH + or - on the remote control. To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0-9 and 100) on the remote control. For example, to select channel 125, press 100, 2, 5. 13 3N42501A[E] (P07-13) 13 1/23/04, 3:14 PM Channel Numbers Channel +/- Exit Menu Appendix Using the TV's Features Setting up your TV Using the Remote Control Connecting your TV Welcome to Toshiba Important Safeguards