Toshiba 32A41 Owners Manual - Page 31
To block channels, Unblocking programs temporarily, BLOCK CHANNEL function
![]() |
View all Toshiba 32A41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Set up Preparation Basic Operation Advanced Operation Reference Section Unblocking programs temporarily 1 If you try to watch a TV program that exceeds the rating limits you set, the TV will enter into the program block mode. THIS PROGRAM HAS BEEN BLOCKED! TV-PG L V EXCEEDS SET LIMITS PUSH MUTE TO ENTER PIN CABLE 4 2 If you want to watch the blocked program temporarily, press MUTE. Press the Channel Number buttons (0-9) to enter your 4-digit PIN code. If the number is correct, the block mode will be released. After 1 second, the normal picture will appear. BLOCKING IS ACTIVE PLEASE ENTER PIN CODE TO TEMPORARILY UN-BLOCK ~~~- SELECT[0-9] END[EXIT] All blocking is disabled until the TV is turned off, and will be enabled when the TV is turned on again. If a wrong PIN code is entered, the message, "Incorrect PIN Code" appears. Enter the code again. See page 28 for details on entering the PIN code. INCORRECT PIN CODE PLEASE ENTER PIN CODE TO TEMPORARILY UN-BLOCK ~~~~ SELECT[0-9] END[EXIT] BLOCK CHANNEL function You can use the BLOCK CHANNEL function to block specific channels. You will not be able to tune blocked channels unless you clear the setting. You can block a maximum of 4 TV channels and 4 CABLE channels. To block channels: 1 Select the channel you want to block. 2 While in the V-CHIP CONTROL menu, press t or s to select BLOCK CHANNEL. ENABLE BLOCKING : [Y]N SET RATING SET BLOCKING OPTIONS NEW PIN CODE BLOCK CHANNEL MOVE[t s ] SELECT[T S ] 3 Press T or S to display the BLOCK CHANNEL menu. BLOCK CHANNEL [SET]CLEAR 0 0 0 0 SELECT[T S ] SET[t s ] END[EXIT] 4 Press T or S to select SET, and then press t or s until the channel number to be blocked ("2" in this example) replaces "0" in the menu. BLOCK CHANNEL [SET]CLEAR 0 0 0 2 SELECT[T S ] SET[t s ] END[EXIT] 5 Repeat steps 1-4 for other channels. 6 Tune the TV to another channel before turning off the TV or the TV will be on a blocked channel the next time you turn it on. To unblock channels: 1 Repeat steps 2- 4 above, selecting CLEAR in step 4 (instead of SET). 2 Press t or s until "0" replaces the channel numbers (this unblocks all blocked channels; you cannot unblock individual channels). BLOCK CHANNEL SET [CLEAR] 15 10 6 2 SELECT[T S ] CLEAR[t s ] END[EXIT] 0 0 0 0 3 Press EXIT to clear the on-screen display. 31
![](/manual_guide/products/toshiba-36a41-owners-manual-34cfd45/31.png)