Toshiba 32C120U User Guide - Page 27
Connecting an HDMI® or DVI device to the HDMI® input, Sample Illustration Connecting an HDMI, device - 32 tv
View all Toshiba 32C120U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Connecting Your TV 27 Connecting an HDMI® or DVI device to the HDMI® input NOTE EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV. The HDMI® input can accept and display VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i (60Hz), and 1080p (24Hz/60Hz) signal formats. For detailed signal specifications, see "HDMI® signal formats" on page 122. Supported Audio format: Linear PCM, sampling rate 32/44.1/48 kHz. NOTE To connect a computer to the HDMI® input, see "Connection to the TV's HDMI® terminal" on page 33. To connect an HDMI® device, you will need one HDMI® cable (type A connector) per HDMI® device. ❖ For proper operation, it is recommended that you use an HDMI® cable with the HDMI® Logo ( ). ❖ HDMI® cables transfer both video and audio. Separate analog audio cables are not required. See "Setting the HDMI® audio mode" on page 50. TV back panel Playback device (Sample Illustration) Connecting an HDMI® device