Toshiba 32DT2U Owners Manual
Toshiba 32DT2U Manual
 |
View all Toshiba 32DT2U manuals
Add to My Manuals
Save this manual to your list of manuals |
Toshiba 32DT2U manual content summary:
- Toshiba 32DT2U | Owners Manual - Page 1
Owner's Manual Integrated High Definition LCD Television HIGH-DEFINITION TELEVISION 32DT2U 32DT2UL 40FT2U Foran overview of steps for setting up yournewTV, see page10. Note: To display a High Definition picture, the TV must be receiving a High Definition signal (such as an over-the-air High Definition - Toshiba 32DT2U | Owners Manual - Page 2
Dear Customer, Thank you for purchasing this Toshiba LCD TV. This manual will help you use the many exciting features of your new LCD TV. Before operating your LCD TV, please read this manual completely, and keep it nearby for future reference. Safety Precautions WARNING: TO REDUCE THE RISK OF FIRE - Toshiba 32DT2U | Owners Manual - Page 3
's instructions. with the cart, stand, tripod, bracket, turn off the TV and unplug the power cord to avoid possible electric shock or fire. • NEVER allow your body to come in contact with any broken glass or liquid from the damaged television. The LCD panel inside the TV warranty, and b) the user - Toshiba 32DT2U | Owners Manual - Page 4
system; or b) cables, wires, or any home theater component connected to an antenna or phone system. Care For better performance and safer operation of your TOSHIBA TV, follow these recommendations and precautions: 34) If you use the TV in a room whose temperature is 32 °F (0 °C) or below, the - Toshiba 32DT2U | Owners Manual - Page 5
injury. Refer all servicing not specified in this manual to a Toshiba Authorized Service Provider. 44) If you have the TV serviced: • Ask the service technician to use only replacement parts specified by the manufacturer. • Upon completion of service, ask the service technician to perform routine - Toshiba 32DT2U | Owners Manual - Page 6
all four screws holding the pedestal stand in place, remove the pedestal stand from the TV. 32/40" TV VESA Mounting Pattern Four screws Hook Sturdy strap (as short as possible) CAUTION: Always place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit - Toshiba 32DT2U | Owners Manual - Page 7
could void the user's authority to operate this equipment. Important notes about your LCD TV The following symptoms are technical limitations of LCD Display technology and are not an indication of malfunction; therefore, Toshiba is not responsible for perceived issues resulting from these symptoms - Toshiba 32DT2U | Owners Manual - Page 8
the Game Mode feature 50 Chapter 8: Troubleshooting 51 General troubleshooting 51 Chapter 9: Appendix 53 Specifications 53 Acceptable signal formats for PC IN and HDMI terminals 54 Limited United States Warranty for LCD Televisions....... 55 Limited Canadian Warranty for Toshiba Brand Flat - Toshiba 32DT2U | Owners Manual - Page 9
of your new Toshiba widescreen, integrated HD, LCD TV: • Integrated digital tuning (8VSB ATSC and QAM) eliminates the need for a separate digital converter set-top box (in most cases). • 1366 x 768 output resolution (32DT2U / 32DT2UL). 1920 x 1080 output resoluation (40FT2U). • HDMI® digital, high - Toshiba 32DT2U | Owners Manual - Page 10
, installation, care, and service information. Keep this manual for future reference. 2 Observe the following when choosing a location for the TV: • Read "Important notes about your LCD TV" ( page 7). • Place the TV on the floor or a sturdy, level, stable surface that can support the weight of the - Toshiba 32DT2U | Owners Manual - Page 11
connections Models 32DT2U, 32DT2UL, and 40FT2U are used in this manual for illustration purposes. Left side panel 3 7 4 8 5 6 9 TV front TV top 10 21 1無 Green LED Power LED (Green) = Power indicator 2無 Remote sensor (embedded) - Point the remote control toward this remote sensor ( "Remote - Toshiba 32DT2U | Owners Manual - Page 12
menu ( page 43). 4無 ANT/CABLE - Input that supports analog (NTSC) and digital (ATSC) off-air antenna signals and analog and digital Cable TV (QAM) signals. 5無 DIGITAL AUDIO OUT - Digital audio output in Dolby Digital or PCM (Pulse-Code Modulation) format for connecting an external Dolby Digital - Toshiba 32DT2U | Owners Manual - Page 13
) Coaxial cable is used for connecting your antenna, cable TV service, and/or cable converter box to the ANT/CABLE input on your TV. Standard A/V cables (red/white/yellow) Standard A/V cables (composite video) usually come in sets of three, and are for use with video devices with analog audio and - Toshiba 32DT2U | Owners Manual - Page 14
using the white audio cable only. • Standard audio cables. Note: • When you use a Cable box, you may not be able to use the remote control to program or access certain features on the TV. • When you use ColorStream HD or Video, switch AV input mode appropriately ("Setting AV Input mode" on page - Toshiba 32DT2U | Owners Manual - Page 15
AV Input mode" on page 26). To view antenna or Cable channels: Select the ANT/CABLE video input source on the TV.* To view the DVD player: Turn ON the DVD player. Select the ColorStream HD video input source on the TV.* To view satellite programs using the component video connections: Turn on the - Toshiba 32DT2U | Owners Manual - Page 16
60Hz), 720p (60Hz), 1080i (60Hz) and 1080p (24Hz/60Hz) signal formats. For detailed signal specifications, see page 56. Supported Audio format: Linear PCM, sampling rate 32/44.1/ 48 kHz Note: To connect a PC to the HDMI input, see page 19. To connect an HDMI device, you will need: • One HDMI cable - Toshiba 32DT2U | Owners Manual - Page 17
page 47). • The connected devices must also be set. For details, see the operation manual for each device. • The REGZA-LINK® feature uses the CEC technology as regulated by the HDMI standard. • This feature is limited to models incorporating Toshiba's REGZA-LINK®. However, Toshiba is not liable for - Toshiba 32DT2U | Owners Manual - Page 18
hear the sound from the TV's speakers. To connect a PC to the PC IN terminal on the TV: When connecting a PC to the PC IN terminal on the TV, use an analog RGB (15-pin) computer cable and a PC audio cable. TV back panel Analog RGB computer cable PC audio cable 4無 In the Digital Output Format field - Toshiba 32DT2U | Owners Manual - Page 19
. •• If receiving a 480i (HDMI), 480p (HDMI), 720p, 1080i, or 1080p signal program, Native mode scales the video to display the entire picture within the borders of the screen (i.e. no overscanning). Computer PC audio cable PC audio output HDMI-to-DVI adapter cable The HDMI input can accept and - Toshiba 32DT2U | Owners Manual - Page 20
sure to match the + and - signs on the batteries to the signs on the battery compartment. Point remote control toward remote sensor on front of TV. 3無 Reinsert the battery cover in the remote control until the tab snaps. Caution: Batteries must not be exposed to excessive heat such as direct - Toshiba 32DT2U | Owners Manual - Page 21
channel history ( page 29). (Also see "Arrow buttons"). 20無 MENU accesses the main TV menu system ( pages 22-23). The following key functions allow you to control Toshiba REGZA-LINK compatible devices via HDMI connection. ( Page 46, REGZA-LINK playback device control) 21無 STOP Stops the tape or - Toshiba 32DT2U | Owners Manual - Page 22
the main menus (illustrated below), press on the remote control or TV control panel. Icon Picture Sound Preferences Locks Setup Item Mode Picture Settings Noise Reduction Game Mode Theater Settings Digital Audio Selector Audio Settings Audio Setup CC Selector Base CC Mode Digital CC Settings Input - Toshiba 32DT2U | Owners Manual - Page 23
black, depending on the signal the TV is receiving. This is not a sign of malfunction. • When a menu is opened, use the up/down/left/ right arrow buttons (pqtu) on the remote control or pq on the TV control panel to move in the corresponding direction in the menu. • Press to save your menu settings - Toshiba 32DT2U | Owners Manual - Page 24
CABLE In setup window will appear. Press t or u to select the input source (Cable or Antenna) for the ANT/CABLE input on the TV. 5無 If you select Antenna, the Channel Tuning Mode the Initial Setup window will appear every time you turn on the TV. Selecting the menu language You can choose from three - Toshiba 32DT2U | Owners Manual - Page 25
channel programming is finished, you should not have to repeat the programming process again unless your Cable TV service lineup changes significantly. To program channels automatically: 1無 Configure the antenna input source, if you have not already done so ( page 24). 2無 Press and open the Setup - Toshiba 32DT2U | Owners Manual - Page 26
the HDMI® audio mode To set the HDMI audio mode: 1無 Press and open the Sound menu. 2無 Highlight Audio Setup and press . 3無 Press p or q to select HDMI 1 Audio and then press t or u to select the HDMI 1 audio mode (Auto, Digital, or Analog). (Auto is the recommended mode.) See "Connecting an HDMI or - Toshiba 32DT2U | Owners Manual - Page 27
12 and "Setting the PC Audio" on page 43.) Viewing the digital signal meter You can view the digital signal meter in the ANT/ CABLE digital TV input source only scroll through the menu bar to select the Factory Defaults or Support Information and view the related information. To close the screen and - Toshiba 32DT2U | Owners Manual - Page 28
signal is received in video input mode. ••If CEC device is connected to an HDMI input, the REGZA-LINK® icon will appear. If a REGZA-LINK® device with HDMI switching capability (e.g. Audio Receiver) is connected to the HDMI input: Press on the remote or TV control panel repeatedly to highlight HDMI - Toshiba 32DT2U | Owners Manual - Page 29
or to select either Browse Mode or Select Mode. 3無 Press to highlight History List, and then press or to select the setting you prefer: either On, or Off. Note: History List will be cleared every time the TV is powered off. 4無 Press to highlight ANT/CABLE List, and then press or to - Toshiba 32DT2U | Owners Manual - Page 30
Channel Browser™. If Favorites List is turned off, will have no effect. ••Pressing will bring up the Channel Browser™ Favorites list regardless of the last selected list in the Channel Browser™. 30 To tune to a channel or input in Browse mode: 1無 While watching TV, press or to open the Channel - Toshiba 32DT2U | Owners Manual - Page 31
page 24 for details on configuring the antenna input. • Turning off the TV will clear the History List. Setting the Channel Tuning Mode This feature allows you to choose how tuning will be handled for analog and digital channels when the TV is in Antenna mode. Note: To use this feature, the Input - Toshiba 32DT2U | Owners Manual - Page 32
size that displays the current program the way that looks best to you. You can save separate picture size preferences for each input on your TV. To select the picture size using the remote control: 1無 Press on the remote control. 2無 While the Picture Size menu is open, you can do one of the - Toshiba 32DT2U | Owners Manual - Page 33
PC graphics. Note: ••This mode is supported only for HDMI (1080p,1080i, 720p, 480p, and 480i), ColorStream (1080i and 720p), and ANT/ CABLE (digital) inputs (1080p,1080i, and 720p). ••Depending on the input signals, the border of the picture may be hidden, displayed in black, or noisy. Some program - Toshiba 32DT2U | Owners Manual - Page 34
TheaterWide 2 Full The current picture size you set under "Selecting the picture size" on page 32 34 Note: The auto aspect ratio feature is not applicable to PC input. To turn on the auto aspect ratio feature: 1無 Press and open the Picture menu. 2無 Highlight Theater Settings and press . 3無 In the - Toshiba 32DT2U | Owners Manual - Page 35
to adjust (Contrast, Backlight, DynaLight, Brightness, Color, Tint, or Sharpness), and then press or to adjust the setting, as described in the previous table. 4無 To save the new settings, highlight Done and press . You can use any of the picture modes ( "Selecting the picture mode," above left - Toshiba 32DT2U | Owners Manual - Page 36
, Opacity Translucent, Flashing, Solid Caption Text Edge Color Auto, Black, White, Red, Green, Blue, Yellow, Magenta, Cyan CC Selector You can use the CC Selector to temporarily override the default analog caption mode (set in Base CC Mode) for a particular channel. However, once you change to - Toshiba 32DT2U | Owners Manual - Page 37
6: Using the TV's features Adjusting the audio Muting the sound Press on the remote control to partially reduce (1/2 MUTE) or turn off (MUTE) the sound. Each time you press , the mute mode will change in the following order: 1/2 Mute Mute Volume If the closed caption mode is set to Off - Toshiba 32DT2U | Owners Manual - Page 38
TV (see "Connecting a digital audio system" on page 18). To select the digital audio output format: 1無 Press and open the Sound menu. 2無 Highlight Audio Setup and press . 3無 In the Digital Output Format field, select either Dolby Digital or PCM, depending on your device. 4無 To save the new settings - Toshiba 32DT2U | Owners Manual - Page 39
any updates to the rating system should such updates become available. ••The additional rating system is not designed, transmitted, or controlled by the TV or Toshiba, nor is the availability of an additional rating system determined or controlled by Toshiba. Similarly, the rating of programs - Toshiba 32DT2U | Owners Manual - Page 40
program you are watching, press on the remote control. If it is rated "None" the word "NONE" appears in the screen (as shown below right). If rating information is not provided, no rating will appear in the screen. Blocking TV programs by Canada rating 1無 Press and highlight the Locks menu icon - Toshiba 32DT2U | Owners Manual - Page 41
again. Using the GameTimer® You can use the GameTimer to set a time limit for playing a video game (30-120 minutes). When the GameTimer expires, the TV enters Input Lock mode and locks out the input source for the video game device. To set the GameTimer®: 1無 From the Locks menu, press to display - Toshiba 32DT2U | Owners Manual - Page 42
the message "NOT AVAILABLE" appears. 00:00 Note: If a PC is not connected or there is no PC input signal, this feature will be grayed out in the picture is affected by interference, readjust the Clock Phase and Sampling Clock. To adjust the PC settings: 1無 Repeatedly press to select PC input mode - Toshiba 32DT2U | Owners Manual - Page 43
(32DT2U / 32DT2UL) 1920 x 1080 pixels (40FT2U) Supported file system: FAT16 and FAT32 Note: ••Gently insert the USB device into the port and do not remove while using the Media Player. ••USB device: USB Mass Storage Class device (MSC) ••Support is not guaranteed for all devices. ••Connect the USB - Toshiba 32DT2U | Owners Manual - Page 44
are no photo files. ••While the Media Player is active, the main menu cannot be displayed. Viewing photo files There are three types of view modes. Multi View: This view allows you to search for photos in a grid format. These pictures are displayed using thumbnail data in each image file. 1無 Press - Toshiba 32DT2U | Owners Manual - Page 45
not be available in all cases. Setting the sleep timer You can set the sleep timer to turn off the TV after a set length of time (maximum of 12 hours). To set the sleep timer using the remote control: Press on the remote control to set the length of time until the TV turns off. Repeatedly press to - Toshiba 32DT2U | Owners Manual - Page 46
Note: • The default setting of this feature is On. • A warning message will appear 1 minute before turning off. Using REGZA-LINK® This is a new feature that uses CEC technology and allows you to control Toshiba REGZA-LINK® compatible devices from the TV remote via HDMI connection ( page 17). When - Toshiba 32DT2U | Owners Manual - Page 47
. If the TV is turned off the TV will send a message to turn off all of the REGZALINK® devices connected to the TV. From this item, you can set your audio output preference to the TV speakers or the audio receiver speakers. When this item is set to Audio Receiver, the TV remote can be used - Toshiba 32DT2U | Owners Manual - Page 48
Mono or SAP audio status (when HDMI input mode, Dolby Digital or PCM) • Video resolution • Aspect ratio of incoming video signal (4:3 or 16:9) • V-Chip rating status • GameTimer (if set) To close the screen: Press again. To display TV status information using INFO: Press on the remote control. The - Toshiba 32DT2U | Owners Manual - Page 49
settings are connected to the Color Temperature settings and will change based on which setting is selected in Step 5 above. 7無 To save the new settings, highlight Done and press . To revert to the factory defaults, highlight Reset and press . Note: If you select one of the factory-set picture modes - Toshiba 32DT2U | Owners Manual - Page 50
. To turn on Game Mode: 1無 Press and open the Picture menu, then highlight Game Mode. 2無 Press or to select On. To turn off Game Mode: Select Off in Step 2 above, change the video input, or turn the TV off and then on again. Note: You can change the video input by pressing on the remote control - Toshiba 32DT2U | Owners Manual - Page 51
problem experienced. Black box on-screen •• The closed caption feature is set to one of the Text modes (T1, T2, T3, or T4). Set the closed caption feature to Off ( page 36). TV stops responding to controls •• If the TV stops responding to the remote control or TV control panel and you cannot turn - Toshiba 32DT2U | Owners Manual - Page 52
settings of the device, turn off your TV and unplug the power cord, then plug and turn on again. •• If several devices are connected, REGZA-LINK® feature may not operate properly. •• Read the instruction manual furnished with the connected REGZA-LINK® device. HDMI problems For HDMI cables - Toshiba 32DT2U | Owners Manual - Page 53
Linear-PCM; 32/44.1/48 kHz sampling frequency; 16/20/24 bits per sample DIGITAL AUDIO OUTPUT: Coaxial Digital PC INPUT: 15-Pin D-sub Analog RGB Dimensions 32DT2U / 32DT2UL: Width: 2'7-1/2 inches (801.7mm) Height: 1'10-3/4 inches (577.1mm) Depth: 9-5/8 inches (245mm) 40FT2U: Width: 3'3-1/8 inches - Toshiba 32DT2U | Owners Manual - Page 54
250MHz 148.500MHz • Some illustrations in this owner's manual are for explanation purposes and may differ from the actual unit. • Designs and specifications are subject to change without notice. • These models may not be compatible with features and/or specifications that may be added in the future - Toshiba 32DT2U | Owners Manual - Page 55
covered under this limited warranty. How to Obtain Warranty Service After following all of the operating instructions in the Owner's manual, review the section entitled "Concierge" located on our Customer Support Web site at http://support.toshiba.com. If you find that service is needed, follow the - Toshiba 32DT2U | Owners Manual - Page 56
comes first. Your Responsibility Read the owner's manual thoroughly before operating this LCD Television. Complete and mail the enclosed product registration card or register your LCD Television online at http://support.toshiba.ca/warranty/. Registration of your LCD Television will enable TCL - Toshiba 32DT2U | Owners Manual - Page 57
rating label or serial number have been defaced or removed; i. Damage to the Television caused by failure to follow the specifications, User manuals or guides as to usage and/or storage. j. Firmware updates that are posted to the Toshiba Support website and can be performed by the end user via a USB - Toshiba 32DT2U | Owners Manual - Page 58
or sale of, the Television, on the other hand, the provisions of this limited warranty shall prevail. How to Obtain Warranty Services If, after following all of the operating instructions in this manual, checked the "Troubleshooting" section, and have visited www.toshiba.ca/support for additional - Toshiba 32DT2U | Owners Manual - Page 59
: 9740 IRVINE BLVD.; IRVINE, CA 92618 U.S.A. Visual Products Service and Support : 1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A. TOSHIBA OF CANADA LTD. HEAD OFFICE: 191 McNABB STREET, MARKHAM, ONTARIO, L3R 8H2, CANADA CableClear, ColorStream, GameTimer, and TheaterWide are registered trademarks of
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
 |
 |
For an overview of steps for setting up your new TV, see page10.
Note: To display a High Definition picture, the TV must be receiving
a High Definition signal (such as an over-the-air High Definition
TV broadcast, a High Definition digital cable program, or a High
Definition digital satellite program). For details, please contact
your TV antenna installer, cable provider, or satellite provider.
© 2011 TOSHIBA CORPORATION
All Rights Reserved
Owner’s Record
The model number and serial number are on the back
of your TV. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
with your Toshiba dealer about this TV.
Model number:
Serial number:
Owner’s Manual
Integrated High Definition
LCD Television
32DT2U
32DT2UL
40FT2U
HIGH
-DEFINITION TELEVISION