Toshiba 32HLX95 Owners Manual - Page 22
Connecting a digital audio system, Connecting an analog audio system
View all Toshiba 32HLX95 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Chapter 2: Connecting your TV Connecting a digital audio system The TV DIGITAL AUDIO OUT terminal outputs a Dolby Digital or 2-channel down-mixed PCM (pulse-code modulation) signal for use with an external Dolby Digital decoder or other external audio system with optical audio input. You will need: one optical audio cable (Use an optical audio cable that has the larger "TosLink" connector and not the smaller "minioptical" connector.) To control the audio: Turn on the TV and the digital audio device. Press MENU on the TV's remote control and open the Audio menu. Highlight Audio Setup and press ENTER. In the Optical Output Format field, select either Dolby Digital/Surround or PCM, depending on your device (see "Selecting the optical audio output format" on page 76). Audio Audio Settings Advanced Audio Settings Audio Setup Audio Setup MTS Language Speakers Optical Output Format DVD Audio Reset Stereo English On Dolby Digital/Surround Stereo Done Dolby Digital decoder or other digital audio system LINE IN LR Optical Audio IN TV lower back panel CAUTION: Some audio systems may not be compatible with Dolby Digital bitstream signals. Older audio systems that are not compatible with standard optical out signals may not work properly, creating a high noise level that may damage your hearing, speakers or headphones. THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY. Note: • The DIGITAL AUDIO OUT terminal may not output some digital audio sources because of copy restrictions. • The DIGITAL AUDIO OUT terminal outputs signals only when receiving digital broadcasts. Connecting an analog audio system This connection allows you to use external speakers with an external audio amplifier to adjust the sound level. You will need: one pair of standard audio cables To control the audio: Turn on the TV and the stereo amplifier. Turn off the TV's built-in speakers (see "Turning off the built-in speakers" on page 76). Note: To hear sound when using an external audio amplifier, the volume of both the TV and the amplifier must be set to a reasonable listening level. Analog audio amplifier LINE IN LR 22 TV upper back panel Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.