Toshiba 40E210U User Manual - Page 34
Scrolling the TheaterWide, picture, TheaterWide 2 and 3 only, Using the auto aspect ratio feature, - contrast
View all Toshiba 40E210U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Chapter 6: Using the TV's features Scrolling the TheaterWide® picture (TheaterWide 2 and 3 only) You can set separate scroll settings for the TheaterWide 2 and TheaterWide 3 modes for each input. To set the scroll settings: 1無 Press and open the Picture menu. 2無 Highlight Theater Settings and press . 3無 In the Picture Size field, select either TheaterWide 2 or TheaterWide 3 (you cannot scroll in any other mode). 4無 Press to highlight the Picture Scroll field. 5無 Press or to scroll the picture up and down as needed. 6無 To save the new settings, highlight Done and press . To revert to the factory defaults, highlight Reset and press . Note: When receiving a signal at 480i resolution, the picture scroll function may have limited adjustment range. Using the auto aspect ratio feature When the auto aspect ratio feature is set to On, the TV will automatically select the picture size when one of the following input sources is received: • A 480i, 480p, 720p, 1080i digital signal from the ANT/CABLE input • A 480i signal from the VIDEO input • A 480i signal from the ColorStream HD input • A 480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz) signal from the HDMI 1, HDMI 2, and (for G310U)HDMI 3 Aspect ratio of signal source 4:3 normal 4:3 letter box 16:9 full Not defined (no ID-1 data or HDMI aspect data) Automatic aspect size (automatically selected when Auto Aspect is On) 4:3 TheaterWide 2 Full The current picture size you set under "Selecting the picture size" on page 32 34 Note: The auto aspect ratio feature is not applicable to PC input. To turn on the auto aspect ratio feature: 1無 Press and open the Picture menu. 2無 Highlight Theater Settings and press . 3無 In the Auto Aspect Ratio field, select On. 4無 To save the new settings, highlight Done and press . To revert to the factory defaults, highlight Reset and press . To turn off the auto aspect ratio feature: Select Off in step 3 above. Using the FREEZE feature To use the FREEZE feature: 1無 When viewing the TV, press picture a still picture. to make the 2無 To return to the moving picture, press again (or any other button). Note: If the TV is left in FREEZE mode for more than 15 minutes, the FREEZE mode will automatically be released and the TV will return to moving picture. Using the FREEZE function for any purpose other than your private viewing may be prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. Adjusting the picture Selecting the picture mode You can select your desired picture settings from four different modes, as described below. Mode Picture Quality Sports Bright and dynamic picture (factory setting) Standard Standard picture settings (factory setting) Movie Lower contrast for darkened room (factory setting) Designed for viewing of PC tables and PC documents Preference Your personal preferences Note: PC mode is available for HDMI and PC inputs only (grayed out for other input sources). (continued)