Toshiba 40UL605U Owners Manual - Page 67

Chapter 8: Using the TV's network features Easy Setup using PBC (Push Button Configuration) 1 From the Setup menu, highlight Network Setup and press . 2 Press S or T to highlight Wireless Setup, and press . 3 Press S or T to highlight Easy Setup, and press . 4 Press W or X to select PBC. 5 Press T to highlight Start Scan, and press . 6 When a window reporting that the setup succeeded appears, press . To cancel searching for the AP: Press while searching for the AP. A message will appear. Then press W or X to select Yes and press . Easy Setup using PIN (Personal Identification Number) 1 From the Setup menu, highlight Network Setup and press . 2 Press S or T to highlight Wireless Setup, and press . 3 Press S or T to highlight Easy Setup, and press . 4 Press W or X to select PIN. 5 Press T to highlight Start Scan, and press . 6 Press S or T to select the desired AP and press . Note: If a Check the MAC address on label of the AP or the manual of it and select an AP. 7 When the PIN code window appears, enter the displayed PIN into your AP, and then press to start the PIN Setup. When a message displays to report that the setup was successful, press . To cancel searching for the AP: Press while searching for the AP. A message will appear. Then press W or X to select Yes and press . Assisted Setup 1 From the Setup menu, highlight Network Setup and press . 2 Press S or T to highlight Wireless Setup, and press . 3 Press S or T to highlight Assisted Setup, and press . 4 Press S or T to select the desired AP and press . Note: If a Check the MAC address on label of the AP or the manual of it and select an AP. 5 Highlight Security Key and press . The Software Keyboard window will appear. 6 Input the Security Key by using the Software Keyboard ( page 70). To save your setting, press the BLUE button. Note: U The Security Key must adhere to these conditions: − TKIP/AES: 8-63 ASCII or 64 Hex characters − WEP: 5 or 13 ASCII or 10 or 26 Hex characters U Key ID of WEP encryption to set is only one. 7 Highlight Done, and then press . Note: If Network Name is not displayed, see step 4 and 5 in Manual Setup ( the next column) to set Network Name before pressing Done. Note: Settings are not saved if is pressed before Done is selected. Manual Setup 1 From the Setup menu, highlight Network Setup and press . 2 Press S or T to highlight Wireless Setup, and press . 3 Press S or T to highlight Manual Setup, and press . 4 Press S or T to highlight Network Name, and press . The Software Keyboard window will appear. 5 Input the Network Name by using the Software Keyboard ( page 70). To save your setting, press the BLUE button. (continued) 67