Toshiba 46VX700U User Manual - Page 44
Displaying TV status information, Viewing support information, Resetting to Factory Defaults, Power - canada
View all Toshiba 46VX700U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Chapter 6: Basic features Displaying TV status information Viewing support information To display TV status information: Press . The following information will display (if applicable): •Current input (ANT/CABLE, Video, etc.) •If ANT/CABLE is the current input, either "CABLE" (for cable TV) or "ANT" (for over-the-air broadcasts). •Channel number (if in ANT/CABLE mode) •Input label (if set) •Digital signal strength indicator (bar graph in lower right corner of box; for ATSC signal only) •Stereo, Mono or SAP audio status (when HDMI input mode, PCM) •Video resolution •Aspect ratio of incoming video signal (4:3 or 16:9) •V-Chip rating status •GameTimer (if set) To close the screen: Press again. The following additional information (only available for ANT/CABLE input) will display for off air digital channels (if applicable): •Title •Duration •Detailed description To display next program information for digital channels, press again. Pressing a third time will remove the entire banner. ANT 2-2 480i 4:3 NONE Nashville WX Channel 8:59am - 4:59pm EST Nashville WX Channel provides Middle Tenessee and Southern Kentucky weather. 1 Y > SETUP > System Information. 2 Press OK to display support information containing Web/Customer service numbers for US, Canada and Mexico. Resetting to Factory Defaults You can reset all settings and channels. Note: By upgrading, the factory default values may be changed. 1 Y > SETUP > Reset TV > . OK 2 Enter your PIN code (if PIN code has been set). 3 A confirmation screen appears. Select Yes, and press OK . The TV will turn off automatically. To cancel the reset: Press C or c to select No. Press . OK Power failure If the power is cut off while you are viewing the TV, the Last Mode Memory feature automatically turns on the TV when the power is restored. Note: The location of the banner can be moved to the top or bottom of the screen by pressing B or b while the INFO display is onscreen. The last position will be stored to memory. 44