Toshiba 51HX93 Owners Manual - Page 72
Adjusting the picture
View all Toshiba 51HX93 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Chapter 8: Using the TV's features Adjusting the picture Selecting the picture mode You can select your desired picture settings from four picture modes, as described below. Mode Sports Standard Movie Preference Picture Quality Bright and dynamic picture (factory setting) Standard picture settings (factory setting) Lower contrast for darkened room (factory setting) Your personal preferences To select the picture mode: 1. Press MENU and open the VIDEO menu. 2. Highlight PICTURE SETTINGS and press ENTER. Video Picture Settings Theater Settings Advanced Picture Settings 3. Press z to highlight the MODE field, and then x • to select the mode you prefer. Picture Settings ANT 1 Mode Contrast 50 Brightness 50 Color 50 Tint 0 Sharpness 50 Preference Save Done Reset 4. To temporarily save the mode you selected, highlight DONE and press ENTER. To permanently save the mode you selected, highlight SAVE and press ENTER. Note: • The picture mode you selected is for the current input selection only (ANT 1 in the example above). You can select a different picture mode for each input selection. • If you select one of the factory-set picture modes (SPORTS, STANDARD, or MOVIE) and then change a picture quality setting (for example, increase the contrast), the picture mode automatically changes to PREFERENCE in the Picture Settings menu. • Temporarily saved settings will apply until the TV is turned off or the input source is changed. Adjusting the picture quality You can adjust the picture quality (contrast, brightness, color, tint, and sharpness) to your personal preferences. To adjust the picture quality: 1. Press MENU and open the VIDEO menu. 2. Highlight PICTURE SETTINGS and press ENTER. 3. Press z or y to select the picture quality you want to adjust (CONTRAST, BRIGHTNESS, COLOR, TINT, or SHARPNESS), and then x and • to adjust the setting, as described in the table below. Picture Settings ANT 1 Video Picture Settings Theater Settings Advanced Picture Settings Mode Contrast 100 Brightness 50 Color 50 Tint 0 Sharpness 50 Sports Save Done Reset Selection contrast brightness color tint sharpness x Pressing • lower darker paler reddish softer higher lighter deeper greenish sharper 4. To temporarily save the new settings, highlight DONE and press ENTER. To permanently save the new settings, highlight SAVE and press ENTER. Note: The settings you selected are for the current input selection only (ANT 1 in the example above). You can select different settings for each input selection. The picture qualities you adjusted are automatically saved in the PREFERENCE mode (see "Selecting the picture mode" above). Resetting the picture settings To reset the picture settings to their factory values: 1. Highlight RESET in the Picture Settings menu and press ENTER. 2. Highlight SAVE and press ENTER. Note: This resets the pictures settings for the current input source only (ANT 1 in this example). Picture Settings ANT 1 Mode Contrast 100 Brightness 50 Color 50 Tint 0 Sharpness 50 Sports Save Done Reset 72 Copyright © 2003 TOSHIBA CORPORATION. All rights reserved. Downloaded from www(E.M) 5a1n/u5a7ls/l6ib5.cHoXm93manuals search engine