Toshiba 51HX94 Owners Manual - Page 49
Adjusting the color convergence
View all Toshiba 51HX94 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Chapter 6: Setting up your TV Adjusting the color convergence This projection TV uses three separate image tubes: red, green, and blue. The red, green, and blue images are projected onto the screen where they converge to form a full-color picture. You can see a clear picture only when the three images converge correctly. Convergence may drift over time or if you move the TV. If you can see clear images on your TV screen, skip this procedure. This adjustment should be made only after the TV has been on for at least 30 minutes. Automatically adjusting the color convergence using TouchFocus® To automatically adjust the color convergence: Press TouchFocus on the TV front panel one time. TV front panel MENU VOLUME CHANNEL EXIT TV/VIDEO TouchFocus TouchFocus The TV will enter the auto convergence mode. Manually adjusting the color convergence To check and adjust the color convergence manually: 1. Press MENU and open the SETUP menu. 2. Highlight CONVERGENCE and press ENTER. Setup Installation Sleep Timer On/Off Timer HDMI Audio Selection Side Show Interval AVHD Skip Time Convergence Auto 2 Sec 15 min Navigate Select DVD RTN CH RTN Back EXIT Exit 3. When the convergence screen appears, press ENTER. The TV will enter auto-convergence mode. When the adjustment is complete, the TV will enter 56-point convergence mode automatically. cursor TOUCH FOCUS TOUCH FOCUS F I N I SHED Horizontal B R G Vertical When adjustment is complete, the normal picture will reappear. You can adjust the convergence manually described at right for more detailed convergence adjustment. : TO SELECT POS I T I ON ENTER : TO ADJUST CONVERGENCE EX I T : TO F I N I SH ADJUSTMENT If you see separate red, blue, or green crossed lines (or red or blue shadows next to white lines), you need to adjust the convergence. 4. Press yzx • to move the cursor to the position you want to adjust. 5. Press ENTER repeatedly to select RED or BLUE adjusting mode (red crossed lines or blue crossed lines), depending on which color needs adjusting. 6. Press y (up), z (down), x (left), or • (right) on the remote control to converge the red or blue line into the white line. : TO ADJUST RED ENTER : TO CHANGE COLOR EX I T : TO F I N I SH ADJUSTMENT : TO ADJUST BLUE ENTER : TO SELECT POS I T I ON EX I T : TO F I N I SH ADJUSTMENT Copyright © 2004 TOSHIBA CORPORATION. All rights reserved. 51,57HX94(E)044-52 49 Downloaded from www.Manualslib.com manuals search engine 9/12/04, 7:11 PM 49