Toshiba 52HMX84 Owner's Manual - English - Page 11

Introduction Connecting your TV Using the Remote Control Connecting a DVD player or satellite receiver and a VCR This connection allows you to watch DVD/satellite, VCR, and TV programs, and record one TV channel while watching another channel. You will need: • two (or three, if satellite receiver is used) coaxial cables • one set of standard A/V cables • one S-video cable • one pair of standard audio cables Stereo VCR From Antenna IN from ANT OUT to TV CH 3 CH 4 TV VIDEO IN OUT L R AUDIO Note: For the highest possible picture quality from a DVD player or satellite receiver without component video or HDMI, use an S-video cable. (If your DVD player has component video, see page 12. If your DVD player or satellite receiver has HDMI or DVI, see page 15.) Do not connect both an S-video cable and a standard video cable between the TV and DVD player/satellite receiver at the same time or the picture performance will be unacceptable. Do not connect the DVD player/satellite receiver and VCR to the same set of Video inputs on the TV. (See the illustration, which shows the DVD player/satellite receiver connected to VIDEO 1 on the TV, and the VCR connected to VIDEO 2 on the TV.) S-VIDEO VIDEO OUT OUT From Satellite Dish IN from ANT S-VIDEO VIDEO OUT OUT AUDIO OUT L R DVD Player Satellite Receiver AUDIO OUT L R The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. Setting up your TV Using the TV's Features Appendix Index 11