Toshiba 58L7300U User's Guide for Model Series L4300U and L7300U TV - Page 84
Viewing the HDMI, signal information
View all Toshiba 58L7300U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
84 Basic features Viewing the HDMI™ signal information Other HDMI™ CEC Control functions When Enable HDMI CEC Control and all items in the HDMI™ CEC Control Setup menu are set to On, the following functions will be enabled: Item: TV Auto Power Auto Standby Amplifier Control Initial Speaker Setting Description: If an HDMI™ CEC device is turned on, the TV turns on automatically. If the TV is turned off, it will send a message to turn off all of the HDMI™ CEC devices connected to the TV. If Amplifier Control is set to On, you can adjust the sound volume or turn off the sound using the remote control. With this item, you can set your audio output preference to the TV Speakers or the Amplifier. When this item is set to Amplifier, the remote control can be used to adjust or mute the volume of the audio. This item will not be available and set to TV Speakers automatically unless an HDMI™ CEC compatible audio system is connected. NOTE When you turn on the audio system, change its input source, or adjust the sound volume, the sound will be output from the audio system's speakers even if TV Speakers has been selected. Turn the TV off and on again to output the sound from the TV speakers. Viewing the HDMI™ signal information 1 Press the SETUP button. 2 Select Options > HDMI Information Display and press the OK button. 3 Press the p/q (arrow) buttons to select On. 4 Press the INFO button. HDMI™ Information is shown (Resolution, Scan Type, Frame Rate, Aspect, Bit Depth, Color Space, RGB/YUV, Chroma Format), and the normal banner and signal information banner appear. NOTE v The signal information banner will appear when this feature is set to On and you watch an HDMI™ input and press the INFO button. The signal information will disappear after 60 seconds. ❖❖ If you press the INFO button when this feature is set to Off, only the normal banner will appear.