Toshiba 62HMX95 Owner's Manual - English - Page 27
IEEE1394 device management
UPC - 022265251171
View all Toshiba 62HMX95 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Chapter 2: Connecting your TV Connecting IEEE1394 video devices (continued) IEEE1394 device management The IEEE1394 device information is saved in the TV's memory. You can edit this device information (for example, edit the device name, change the analog input information, or delete the device information from the TV's memory if you no longer use that device). To edit the IEEE1394 device information: 1. Press MENU and open the Setup menu. 2. Highlight Installation and press ENTER. (A new set of Installation menu icons will appear on-screen, as shown in step 3 below). Setup Installation Sleep Timer On/Off Timer PC Settings HDMI 1 Audio HDMI 2 Audio Slide Show Interval Auto Auto 2 Sec Navigate Select CH RTN Back EXIT Exit 3. Open the Devices menu, highlight IEEE1394 Devices, and press ENTER. Devices IEEE1394 Devices TheaterNet Devices Navigate Select CH RTN Back EXIT Exit 4. Highlight the device you want to edit and press ENTER. IEEE1394 Device Management Brand Type Label Analog Input Used Connected TOSHIBA AVHD MY DEVICE None No Reset Done 5. Follow the on-screen prompts to modify the device information. Important information regarding IEEE1394 device interconnection • Never loop the last device in the chain back to the TV. If the device chain is looped, the TV may not work properly with the other devices in the chain. • Always place devices with the slowest communication speed at the end of each chain. If a device with a slower communication speed is placed ahead of a faster device in the chain, the signal from the slower device will interfere with the signal from the faster device. To determine the communication speed of an IEEE1394 device, look for an "S" number near the device's IEEE1394 connector. The higher the "S" number, the faster the device. If your device is not marked with an "S" number, look in the device's user manual or call the device manufacturer's technical support number. • If your IEEE1394 device has a two-position power switch, always place the device at the end of the chain and turn ON the power switch when any device is used. If the power switch is OFF, it will interfere with signals from devices behind it in the chain. • The maximum length for an IEEE1394 cable between each device is 15 feet. • This TV is an IEEE1394A device. The IEEE1394B protocol is faster and intended to allow for longer distances between devices and multi-room systems. IEEE1394A-to-IEEE1394B converters (available at some electronics suppliers) may allow compatibility of IEEE1394B devices with your existing IEEE1394A devices. • The transmission capability of IEEE1394 cable used with this TV must be S400 (400 Mbps maximum). Copyright © 2005 TOSHIBA CORPORATION. All rights reserved. 27