Toshiba 65H14 Owners Manual - Page 24
Adding channels to the TV's memory
View all Toshiba 65H14 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Connecting I your TV Using the n Remote Control Adding channels to the TV's memory When you press Channel y or z, your TV will stop only on the channels stored in the TV's channel memory. Follow the steps below and on the next page to program all active channels into the TV's memory. Programming channels automatically Your TV can automatically detect all active channels in your area and store them in its memory. After the channels are stored automatically, you can manually add or erase individual channels (see page 25). To program channels automatically: 1. Press MENU, and then press x or • until the SET UP menu appears. 2. Press y or z until the TV/CABLE is highlighted, and then press ENTER to display the pull-down menu. 3. Press y or z to highlight either TV or CABLE, depending on which you use. If you use an antenna, highlight TV; if you use cable, highlight CABLE. LANGUAGE CLOCK SET ANT 1 / 2 TV / CABLE CH PROGRAM ADD / ERASE SET UP : SELECT ENTER : SET TV CABLE 4. Press ENTER. 5. Press z to select CH PROGRAM. LANGUAGE CLOCK SET ANT 1 / 2 TV / CABLE CH PROGRAM ADD / ERASE SET UP ENGLISH 00:00 ANT1 CABLE ADD : MOVE ENTER : START Note: To tune the TV to a channel not programmed in the channel memory, you must use the Channel Number buttons on the remote control. FAVOTRIOTPE E PIC SIZE ENTEERNT TV/VIDEO RECALL POWER INFO 123 456 78 +10 100 0 MENU FAV 9 CHRTN ENT GUID MENU DVDMENU ER FAV CLE TV CBL/SAT CH VCR DVD VOL POP DIRECT CH MUTE SLEEP TV/VCR PAUSE STOP PLAY FREEZE SOURCE SPLIT REW FF SKIP / SEARCH CH SCAN SWAP REC POP CH LIGHT EXIT AR MENU yzx • ENTER Channel yz 6. Press ENTER to start channel programming. The TV will automatically cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory. While the TV is cycling through the channels, the message "Programming Now-Please Wait" appears. 7. When channel programming is complete,the message "Completed" appears. 8. Press Channel y or z to view the programmed channels. Setting tup your TV Usin rg the TV's Features o Appendix Index d 24 Downloaded from www.Manualslib.com manuals search engine