Toshiba 65H84 Owner's Manual - English - Page 15

Introduction Connecting your TV Using the Remote Control Connecting a HDMI device to the HDMI input HDMI1 (High Definition Multimedia Interface) is the first all digital consumer electronics A/V interface that supports an uncompressed standard. One jack supports both video and audio information. The HDMI input on your TV is designed to accept HDMI program material in digital form from EIA/CEA-861/861B-compliant2 consumer electronic devices, such as a set-top box or DVD player equipped with a HDMI or DVI output connection.3 Applicable video signals No. of dots (H×V) 1080i 720p 480p 480i 1920×1080i 1280×720p 720×480p 640×480p 720×480i Vertical frequencies 59.94/60Hz 59.94/60Hz 59.94/60Hz 59.94/60Hz Note: This TV is not intended for connection to and should not be used with a PC (personal computer). You will need: • one HDMI cable (this HDMI connecter is type A.) Note: For proper operation, the HDMI cable length should not exceed 3m (9.8 ft). The recommended length is 2m (6.6 ft). HDMI device (for example, set top box or DVD player) VIDEO AUDIO LR IN OUT HDMI OUT Notes: 1 HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. 2 EIA/CEA-861/861B compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for future reception of high-definition video signals. 3 Consult your consumer electronics dealer for availability. Caution: To ensure that the HDMI device is reset properly, it is recommended that you follow these procedures: • When turning on your electronic components, turn on the TV first, and then the HDMI device. • When turning off your electronic components, turn off the HDMI device first, and then the TV. TV Setting up your TV Using the TV's Features Appendix Index 15