Toshiba A10-S127 Tecra A10 User Guide - Page 57
Do not force the memory module into position. The memory, when secured in place.
UPC - 032017191716
View all Toshiba A10-S127 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Getting Started Adding memory (optional) 57 13 Once the module's connector is fully inserted into the socket, press downward on the top edge of the module to seat the module into the latches at the sides of the socket. These latches should "snap" into place securely with the corresponding cutouts in the side of the module. If the latches and cutouts do not line up correctly, repeat steps 12-13. latch latch (Sample Illustration) Pressing down on the memory module Do not force the memory module into position. The memory module should be completely inserted into the socket and level when secured in place. Back of computer Slot B Slot A (Sample Illustration) Inserting the memory module into the slot NOTE For this model Slot A is the bottom slot. Slot B is the top slot. If only one memory module is to be installed, it must be installed in Slot A.