Toshiba A100 PSAA8C-SK800C User Manual - Page 202
TSelect tone dialing, VnDCE response format, XnResult code selection, call progress monitoring
View all Toshiba A100 PSAA8C-SK800C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
APPENDIX C User's Manual TSelect tone dialing This command instructs the modem to send DTMF tones while dialing. Dialed digits are tone dialed until a P command or dial modifier is received. This is the default setting. VnDCE response format This command controls whether result codes (including call progress and negotiation progress messages) are displayed as words or their numeric equivalents. V0 Displays result codes as digits. V1 Displays result codes as text (default). Result Codes: OK n=0,1 ERROR Otherwise XnResult code selection, call progress monitoring This command selects which result codes will be used by the modem. Command Dial tone Busy signal Supported Result detect detect Code X0 Disable Disable OK, CONNECT, RING, NO CARRIER, ERROR X1 Disable Disable OK, RING, NO CARRIER, ERROR, CON- NECT X2 Enable Disable OK, RING, NO CARRIER, ERROR, NODI- ALTONE, CONNECT X3 Disable Enable X4 (default) Enable Enable OK, RING, NO CARRIER, ERROR, BUSY, CONNECT , BLACKLISTED OK, RING, NO CARRIER, ERROR, NODIALTONE, BUSY, CONNECT , DELAYED, BLACKLISTED, REORDER, WARBLE, CALL WAITING DETECTED C-6