Toshiba A200 PSAE3C-JA108C Users Manual Canada; English - Page 82
Disconnecting the LAN cable, Wireless LAN
View all Toshiba A200 PSAE3C-JA108C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Operating Basics To connect the LAN cable, follow the steps below. 1. Turn off the power to the computer and to all external devices connected to the computer. 2. Plug one end of the cable into the LAN jack. Press gently until you hear the latch click into place. Connecting the LAN cable 3. Plug the other end of the cable into a LAN hub connector. Check with your LAN administrator before connecting to a hub. Disconnecting the LAN cable To disconnect the LAN cable, follow the steps below. 1. Pinch the lever on the connector in the computer's LAN jack and pull out the connector. 2. Disconnect the cable from the LAN hub in the same manner. Check with your LAN administrator before disconnecting from the hub. Wireless LAN The wireless LAN is compatible with other LAN systems that comply with the IEEE802.11a, 11b, 11g and Draft 11n wireless LAN standards. It supports the following: ■ Automatic Transmit Rate Select mechanism in the transmit range of 54, 48, 36, 24, 18, 9, 6 Mbps for 802.11a/b/g and 802.11b/g wireless LAN module. ■ Advanced Encryption Standard (AES) data encryption, based on 256bit encryption algorithm. Wake-up on LAN does not function on a Wireless LAN. ■ Frequency Channel Selection (2.4 GHz or 5 GHz) ■ Roaming over multiple channels ■ Card Power Management ■ Wired Equivalent Privacy (WEP) data encryption 4-10 Satellite A200/Satellite Pro A200