Toshiba A210 PSAFGC-06208C Users Manual Canada; English - Page 156
LAN, Connecting LAN cable
View all Toshiba A210 PSAFGC-06208C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Operating Basics LAN The computer has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T) or Fast Ethernet LAN (100 megabits per second, 100BASETX)(depending on model you purchased). This section describes how to connect/ disconnect to a LAN. Do not install or remove an optional memory module while Wakeup on LAN is enabled. The Wake-up on LAN function consumes power even when the system is off. Leave the AC adaptor connected while using this feature. Connecting LAN cable The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer's default settings could cause a malfunction in LAN operation. Check with your LAN administrator regarding set-up procedures. If you are using Fast Ethernet LAN (100 Mbit/s, 100BASE-TX), be sure to connect with a category 5 cable, CAT5, or higher. If you are using Ethernet LAN (10 Mbit/s, 10BASE-T), connect with a category 3 cable, CAT3, or higher. To connect the LAN cable, follow the steps below. 1. Turn off the power to the computer and to all external devices connected to the computer. OPERATING BASICS 4-56 User's Manual