Toshiba A30-D1300ED Users Guide for Portege R30-D and Tecra C40-D/A40-D - Page 108
Wireless display, Changing the external playback settings
View all Toshiba A30-D1300ED manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Wireless display Your computer might support wireless display, a wireless technology which utilizes Wi-Fi® to allow the computer to be wirelessly connected to external displays including TVs as extended screens. With wireless display, documents, streamed/local media contents or other online contents can be shared wirelessly with others. To use wireless display, either one of the following devices is required: A compatible external display with built-in support for wireless display. An external display with HDMI™ port and a wireless display adaptor. The wireless display adaptor is a device that connects to the external display via HDMI™ port and can receive Wi-Fi® signals from your computer. To wirelessly connect to an external display, you can follow the steps as described below: 1. Go to (Settings) and click Devices -> Connected devices. 2. Click Add a device. Your computer starts searching for the wireless display device. 3. After the wireless display device is searched, follow the on-screen instructions to finish connection. After the connection is established, the name of the wireless display device appears under Projectors. To disconnect the Wireless display device, click the wireless display device name and then click Remove device. Changing the external playback settings After one or more external displays are connected, the operating system can automatically detect, identify, and set up the display settings. You can also manually manage how the external displays work and change the display settings by pressing P while holding down the Windows ( ) key. If you disconnect the external display before you turn off the computer's power, be sure to switch to the internal display. When you change the display output device, the audio playback device might not switch automatically. In this case, in order to set the playback device to the same device as the display output device, adjust the audio playback device manually by the following steps: 1. Click Start -> Windows System -> Control Panel -> Hardware and Sound -> Sound. 2. In the Playback tab, select the playback device which you want to switch to. 3. To use the internal speakers on your computer, select Speakers. To use the television or the external monitor that you have connected to the computer, select a different playback device. User's Manual 4-42