Toshiba BDX1200KU Owners Manual - Page 18

English [TV] • [TV Screen] Select the screen format according to how you want the picture to appear on the TV. {16:9 Full} - for a disc with the aspect ratio of 4:3, the output video is stretched into 16:9 full screen. {16:9 Normal} - for a disc with the aspect ratio of 4:3, the output video is resized vertically to match what will be seen on the display. {4:3 Pan&Scan} - for standard TV, Display a wide picture on the entire screen and cuts off the redundant portions. {4:3 Letterbox} - for standard TV, Display a wide picture with two black borders on the top and bottom of 4:3 screen. • [Resolution] Select a video output resolution that is compatible with your TV display capability. {Auto} - Select the most suitable resolution according to the TV . {480i}, {480p}, {720p}, {1080i}, {1080p} - Select a video resolution setting that is best supported by the TV. See TV manual for details. Note: -When resolution is set to 720p/1080i/1080p: (1) If only CVBS connected, the resolution of CVBS video output will be set to 480i automatically. (2) If HDMI and CVBS are both connected, there will be no CVBS video output, instead, a message will be shown as follows: Out Of Range:Check Display Resolution • [Color Space] Select a predefined Color space of picture. {RGB} - Select RGB Color space. {YCbCr} - Select YCbCr Color space. {YCbCr422} - Select YCbCr422 Color space. {Full RGB} - Select Full RGB Color space. • [HDMI Deep Color] This feature is available only when the display device is connected by a HDMI cable, and when it supports deep Color feature. {30 bits} - Output 30 bits Color. {36 bits} - Output 36 bits Color. {Off} - Output standard 24 bits Color. Note: - When the color space is "YCbCr422", even if HDMI Deep Color is set to 30bits/36bits, it is not output with Deep Color. • [HDMI 1080/24p] {On} - Enable 1080/24p video resolution setting. {Off} - Disable 1080/24p video resolution setting. Notes about HDMI 1080/24p: If you want the 24Hz output, it should fulfill below 3 conditions: 1.TV supports the 24Hz display; 2.Player choose the 24Hz option in the setup menu; 3.Media must be the 24Hz video. Notes: - This resolution becomes effective only when the playing Blu-ray Disc™ contents are Film source. - During HDMI 1080/24p playback, there will be no composite output. [Video Process] Display Setting TV Video Process Motion Video... Video Adjust Sharpness More... Low Move cursor key to select menu option then use "OK " key to select SETUP Exit • [Video Adjust] Select a predefined setting of the video. 1. Press OK . 2. Press/ to adjust the video Brightness, Contrast, Hue and Saturation. {Brightness} - press t/ to adjust the brightness of display, goes left means dark and right means bright. {Contrast} - press t/ to adjust the contrast of display, goes left means low contrast and right means high contrast. {Hue} - press t/ to adjust the Hue of display, goes left means low hue and right means high hue. {Saturation} - press t/ to adjust the saturation of display, goes left means low Saturation and right means high saturation. 18