Toshiba BDX2500KU Service Manual - Page 40
Firmware Upgrade, Procedure - bdx2500
View all Toshiba BDX2500KU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Firmware Upgrade Procedure For Engineering Evaluation Only 1. Plug in the AC cord of the unit. 2. Turn on the unit by pressing the POWER/ STANDBY ( ) button on the front of the unit. (Not the POWER button on the remote control). 3. Open the DVD door. 4. Put in the Firmwave Upgrade disc and close the DVD door. The screen shows " Loading". 5. About 30 seconds later TV screen shows "Firmware Upgrade" selection menu. Firmware Upgrade Erase and program OK Cancel 6. Press "left arrow key" on remote control to EN T select "OK". 7. Press ENT/ENTER on remote control. Do not power off the unit from ! now for at least 5 minutes until the firmware upgrade is completed. If unit is powered off during firmware upgrade, it may be damaged permanently!! During firmware upgrade, TV shows following message. Firmware Upgrade programming, please wait... Do not switch the player off! 8. Wait 1 minute more and then open the DVD door to collect Firmware Upgrade disc. 9. Wait 30 seconds. Close the tray and shut down automatically. 10. Turn on the unit. Press SETUP to select "Default Setting" to reset the DVD. 11. Wait 10 seconds to make sure screen shows "no disc". FW Version checking procedure 1. Open DVD door. 2. Press remote ANGLE and then DISPLAY, firmware version will be shown on TV. Welcome BDX2500 V1. 12. 3. Turn off the power. 10-1