Toshiba DR550 Owners Manual - Page 103
Video cont'd
UPC - 022265000274
View all Toshiba DR550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Introduction Connections Basic Setup GENERAL SETTING Video (cont'd) 1 Progressive (Default : OFF) This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set progressive scan mode to "ON". 1) Use [K / L] to select "ON", then press [ENTER]. General Setting Playback Display Video Recording Clock Channel DivX HDMI Reset All Progressive ProgressivTeV Aspect Select Video ON OFF 2 TV Aspect (Default: 4:3 Letter Box) You can select the TV aspect ratio to match the formats of what you are playing back with the unit and your TV screen (4:3 standard or 16:9 widescreen TV). Use [K / L] to select a desired option, then press [ENTER]. General Setting Playback Display Video Recording Clock Channel DivX HDMI Reset All Progressive TV Aspect TV Aspect Select Video 4:3 Letter Box 4:3 Pan & Scan 16:9 Wide 2) Use [{ / B] to select "Yes", then press [ENTER]. General Setting PlAaycbtiavcakting progressive scan: DiCsphleacyk your TV has progrPersosgivreessscivaen Viadnedo connect wPirtohgcreosmspivoTenVenAtsvpiedceto cable. Rcording Select Video Clock ON ChNaOnTnEel: OFF DivX If there is no picture or picture is HDޓMޓI distorted after selecting "Yes", Reޓseޓt AWll ait about 15 seconds for auto recovery. Activate? Yes No If you have a standard TV: Select "4:3 Letter Box", so that black bars appear on the top and bottom of the TV screen when playing back a wide-screen picture. Select "4:3 Pan & Scan" for a full height picture with both sides trimmed when playing back wide-screen picture. If you have a widescreen TV: Select "16:9 Wide". 3) Use [K / L] to select "Yes" within 15 seconds, then press [ENTER]. Your setting will be activated. Note • If your TV is compatible with progressive scan (480p), you are recommended to use the HDMI or component video cable (commercially available) to connect this unit to the TV. (Refer to "Method 3" on page 21 or page 22.) If not, use the RCA video cable and set the progressive scan to "OFF" or press and hold [SETUP] for more than 3 seconds during DVD playback. • When selecting "No" or not pressing any buttons on the unit or remote control within 15 seconds at step 3, progressive scan remains to be "OFF" (interlace scan). Disc Management Recording Playback Editing Function Setup Others &)6%@&/JOEC EN 103