Toshiba Flash Air PFW016U-1BCW FlashAir II Windows Software Setup Guide - Engl - Page 5

Toshiba recommends you make a note of your SSID and password.  Use the same network settings, even after the card is formatted. This option is available for FlashAir™ W-02. Uses the same network settings, even after the card is formatted. ⇒After setting, even if you format FlashAir, the SSID and the password settings are maintained. Note that the following way is required to reset SSID and password to their initial state. - Initialize the card using this Software (Ver.2.00 or later). The initialize the card feature causes all the data stored in FlashAir™ to be lost. Back up your data on some other storage media before formatting FlashAir™. Wireless LAN Startup Mode When the "Wireless LAN Startup Mode" is selected, the following window is displayed. You can set the wireless LAN startup mode. Select a startup mode and click "Apply". There are two startup modes. One is the automatic startup mode and the other is the manual startup mode.  Wireless LAN Startup Mode: Automatic startup mode