Toshiba Flash Air PFW032U-1BCW FlashAir II Firmware Update Tool Manual (Mac) E - Page 10

the Product.

Page 10 highlights

The Progress bar is displayed when the software update starts. Remove the Product from the SD slot and wait five seconds, then re-insert it into the SD slot again. After that, confirm that the Product re-appears on the Finder as a device, then click the "OK" button. The progress bar is displayed again and when the update is finished, the following window is displayed. Remove the Product from the SD slot and wait five seconds, then re-insert it into the SD slot again. After that, confirm that the Product re-appears on the Finder as a device, then click the "OK" button. The progress bar is displayed again and when the update is finished, the following window is displayed. After the update is finished, do the initial settings according to the supplementary manual attached to the Product. This completes the product's firmware update. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

10
The Progress bar is displayed when the software update starts.
Remove the Product from the SD slot and wait five seconds, then re-insert it into the SD slot again.
After that, confirm that the Product re-
appears on the Finder as a device, then click the “OK” button.
The progress bar is displayed again and when the update is finished, the following window is
displayed.
Remove the Product from the SD slot and wait five seconds, then re-insert it into the SD slot again.
After that, confirm that the Product re-
appears on the Finder as a device, then click the “OK” button.
The progress bar is displayed again and when the update is finished, the following window is
displayed.
After the update is finished, do the initial settings according to the supplementary manual attached to
the Product.
This completes the product
s firmware update.