Toshiba Flash Air PFW032U-1BCW FlashAir II User's Manual - English - Page 1
Toshiba Flash Air PFW032U-1BCW Manual
View all Toshiba Flash Air PFW032U-1BCW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
SDHC memory card with embedded wireless LAN functionality FlashAir™ II (Wireless LAN model) User Manual Thank you for purchasing a Toshiba FlashAir™ II (Wireless LAN model) (hereafter Product). Precautions The Product can be used with devices that are compatible with 16 GB/32 GB SDHC memory cards. Before using the Product, read the manual carefully and entirely for the device in which you intend to use the Product. Procedures may vary depending on whether your device supports FlashAir™ Wireless LAN models. If your device supports FlashAir™ II Wireless LAN models, use the Product according to the procedure in your device's manual. If your device does not support FlashAir™ II Wireless LAN models, use the Product according to the procedure in this manual and your device's manual. This manual describes how to browse and download data stored in the Product using a Wi-Fi® device. There are two ways to format the Product. You can initialize the Product using the FlashAir™ II configuration software (Ver.2.00 or later), or format the Product on the device that is compatible with SDHC memory cards, such as a digital camera, you are using. Formatting the Product causes all the data stored in the Product to be lost. Back up your data on some other storage media before formatting the Product. If you format the Product using a device that is compatible with SDHC memory cards, you must do the procedure described in FAQ Q1. If you do not use this procedure, the data stored in the Product may be destroyed. Initial Settings Before using the Product, be sure to change the password (security key) in one of the following ways. If you fail to do so, your data may be accessed by a third party. Before initial setup please download the firmware update tools from http://support.toshiba.com/ This program will confirm you have the latest firmware on your FlashAir II device or allow you to update to the latest revision of firmware.