Toshiba HD A35 Owners Manual - Page 23

When you connected an audio system to the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack ( page 16): Press / to select "Speaker Setting", then press OK. Select one of the followings according to your connection, and press OK. 5.1ch When a 5.1 channel surround system is connected to this player. 3PEAKER3ETTING CH CH 1 Set the speaker sizes, distance to each speaker and the crossover frequency. Front Left / Front Right Small: Select if the speaker cannot output low frequency. Large: Select if the speaker can output low frequency. Center / L Surround / R Surround Small: Select if the speaker cannot output low frequency. Large: Select if the speaker can output low frequency. None: When the speaker is not connected. Subwoofer Use: When a subwoofer is connected. Don't Use: When a subwoofer is not connected. Crossover Setting Low frequency under this frequency (80Hz / 100Hz / 120Hz) will be output to a connected subwoofer. EG &RONT,EFT ,ARGE  FT &RONT,EFT ,ARGE  FT ft Select a distance to each speaker from the listening position. 2 Select "Next", then press OK. To cancel to return to the previous screen, select "Clear", then press OK. To save your selection and finish the setting, select "Clear", then press OK. 3 Select "Automatic Test Tone", then press OK. A test signal is set to each speaker. 4 Adjust each of the volumes by / , selecting speakers by / so that each speaker can sound at the same volume. For further adjustment, check the channel balance on the amplifier. EG 5 When complete, select "OK", then press OK. &RONT,EFT #ENTER &RONT2IGHT Note • This setting is effective only when "Digital Out SPDIF" ( page 22) is set to "PCM".  D"  D"  D" 2ch When a 2ch stereo system is connected to this player. 17 Press RETURN or to return to the menu of step 1. )%",6,$@FOJOEE


 23 1.