Toshiba M10 PTMB0C-05D02L Users Manual Canada; English - Page 90
Using the AccuPoint, AccuPoint precautions, Replacing the cap
View all Toshiba M10 PTMB0C-05D02L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
TECRA A10/S10/M10/SatellitePro S300 Using the AccuPoint To use the AccuPoint, simply push it with your finger tip in the direction you want to move the on-screen pointer. Two buttons above the Touch Pad work in the same way with the AccuPoint as they do with the Touch Pad. Refer to the Using the Touch Pad section for details. Some models are equipped with an AccuPoint. AccuPoint precautions Certain conditions can affect the on-screen pointer when using AccuPoint. For example, the pointer may travel contrary to AccuPoint operation or an error message may appear, if ■ You touch the AccuPoint during power-up. ■ You apply constant, soft pressure during power-up. ■ There is a sudden temperature change. ■ Strong stress is applied to the AccuPoint. If an error message appears, reboot the computer. If an error message does not appear, wait a moment for the pointer to stop, then continue operation. Replacing the cap The AccuPoint cap is an expendable item that should be replaced after prolonged use. The spare AccuPoint cap is supplied with the computer. 1. To remove the AccuPoint cap, firmly pinch the cap and pull it straight up. AccuPoint cap Figure 4-2 Removing the AccuPoint cap 2. Position a new cap on the peg and press it into place. The peg is square, so be careful to align the cap's square hole with the peg. 4-2 User's Manual