Toshiba M10 PTMB0C-06202L Users Manual Canada; English - Page 215
Cleaning the cooling module, Please click [OK] to run the TOSHIBA Cooling
View all Toshiba M10 PTMB0C-06202L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
TECRA A10/S10/M10/SatellitePro S300 4. If the "Please click [OK] to run the TOSHIBA Cooling Performance Diagnostic Tool to check the cooling performance of your PC." message is still displayed after running the "TOSHIBA Cooling Performance Diagnostic Tool" in step 3, it is recommended you turn off the computer and contact TOSHIBA support. Cleaning the cooling module This section explains how to clean the cooling module. If you use the computer for a long period, the inside of the computer may become hot. Always allow the computer to cool to room temperature before you clean the cooling module. To clean the cooling module, follow the steps detailed below: 1. Shut down the computer - make sure the Power indicator is off (refer to the Turning off the power section in Chapter 1, Getting Started if required). 2. Remove the AC adaptor and all cables and peripherals connected to the computer. 3. Close the display panel and turn the computer upside down. 4. Remove the battery pack (refer to the Replacing the battery pack section in Chapter 6, Power and Power-Up Modes, if required). 5. Using a thin-tipped tool, push on the hole in the edge of the Cooling module cover and slide it in the direction of the arrow to remove. Cooling module cover Hole Figure G-1 Removing the cooling module cover 6. Lift the plastic film and clean the cooling module using a vacuum cleaner or other cleaning tool. Do not use a ball pen, cotton swap or similar to remove dust. If these touch the inside of the computer, it could be damaged or become clogged, leading to further problems. User's Manual G-3