Toshiba M9 PTM91C-TG409C Users Manual Canada; English - Page 188

AT Commands Result Codes: OK n=0,1 ERROR Otherwise T Select tone dialing This command instructs the modem to send DTMF tones while dialing. Dialed digits are tone dialed until a P command or dial modifier is received. This is the default setting. Vn DCE response format This command controls whether result codes (including call progress and negotiation progress messages) are displayed as words or their numeric equivalents. V0 Displays result codes as digits. V1 Displays result codes as text (default). Result Codes: OK n=0,1 ERROR Otherwise Xn Result code selection, call progress monitoring This command selects which result codes will be used by the modem. Command Dial tone detect Busy signal detect Supported Result Code X0 Disable Disable OK, CONNECT, RING, NO CARRIER, ERROR X1 Disable Disable OK, RING, NO CARRIER, ERROR, CONNECT X2 Enable Disable OK, RING, NO CARRIER, ERROR, NODIALTONE, CONNECT X3 Disable Enable OK, RING, NO CARRIER, ERROR, BUSY, CONNECT , BLACKLISTED X4 (default) Enable Enable OK, RING, NO CARRIER, ERROR, NODIALTONE, BUSY, CONNECT , DELAYED, BLACKLISTED, REORDER, WARBLE, CALL WAITING DETECTED X5 Enable Enable OK, RING, NO CARRIER, ERROR, NODIALTONE, BUSY, CONNECT , RRING, NO BONGTONE, DELAYED, BLACKLISTED, REORDER, WARBLE, CALL WAITING DETECTED User's Manual C-5