Toshiba MD13Q42 User Manual - Page 37

JPEG playback You can select your desired JPEG file on the file menu and picture menu. The selected JPEG file is automatically adjusted to the TV screen. (When the aspect ratio of the JPEG file is different to your TV screen, the black bar will appear at the top and bottom, or the both sides of the TV screen). CAUTION: Some JPEG CDs cannot be played back depending on the recording conditions. 0-9 PAUSE ENTER ▲/▼/ / STOP PLAY SKIP / ANGLE CD JPEG CD playback CD Slide show playback 1 Place a JPEG disc on the disc tray. 2 A file menu screen will appear on the screen. Press / to select folder. CD Collection 1 Pic-1 2 Pic-2 3 Pic-3 4 Pic-4 -/36 8 Pic-8 9 Pic-9 10 Pic-10 11 Pic-11 3 Press / / / or Number buttons (0-9) to select the desired file. The slide show enables you to view pictures (files) one after another automatically. Preparation: Set "JPEG Interval" setting to "5 Seconds", "10 Seconds" or "15 Seconds" 40 . 1 Select your desired starting file for the slide show in the step 3 on left. 2 Press ENTER to start slide show from the selected file. Advanced playback • If you press PAUSE during the slide show, the slide show stops temporary. " 4 " appears briefly on the • To display next list, press SKIP or . screen. If the picture appears upside down or sideways, press 4 Press ENTER. The selected picture appears on the screen. ANGLE repeatedly until it's right side up. " ", " ", " " or " " appears briefly on the screen. Press PLAY or SKIP again to resume the slide show. • When the slide show playback finished, the file list appears. Rotating an image • To stop the slide show, press STOP. The file list appears. You can rotate an image by 90 degrees. Press ANGLE during playback of the image. " ", " ", " " or " " appears briefly on the screen. 5 Press STOP to end playback. The file menu appears on the screen. If you want to watch the other file, repeat steps 3 ~ 4. JPEG CD Information Limitations on JPEG CD playback • JPEG CD is the disc that is standardized by ISO9660, its file name must include 3-digits extension letters, "jpg". • The directory and file names of the JPEG CD must be correspond to the ISO standardized files. • This unit can read 600 files per disc. If a disc has more than 600 files, it reads up to 600 files, the remaining files will be omitted. • The unit is able to recognize up to a maximum of 50 directories per disc. • It may take more than one minute for this unit to read JPEG files depending on its structure. Notes: Limitations on display • During JPEG playback, you cannot use SEARCH and A-B • The maximum number for display is 16 letters. Available Repeat functions. letters for display are the following: capital or small • You can use Repeat (Track or All), Random and Program alphabets of A through Z, numbers of 0 through 9, and _ functions for JPEG CD playback 32 33 . (under score). • Other letters than those above are replaced in hyphen. Notes on JPEG files To play back JPEG CD in the recorded order, 1. Use JPEG software that records data alphabetically or numerically. 2. Name each file including two-digit or three-digit number (ex. "01" "02" or "001" "002"). 3. Refrain from making too many sub-folders. 37 5X30401A [E] (P33-37) 37 12/3/05, 3:31 PM