Toshiba MET400-PK User Guide - Page 17

16 Getting Started with Your gigabeat® Charging the built-in battery/Connecting your computer and the NOTE ❖ So that your gigabeat® can communicate with your computer properly, be sure to install Windows Media® Player 11 or 10 on your computer before connecting the gigabeat® to your computer. ❖ It is recommended that you run Windows® Updates on your computer after installing the software, to check for new module updates. 1 Insert the CD-ROM that came with your gigabeat® into your computer. The CD-ROM will be automatically recognized and the installation menu for application software will appear. If this menu is not displayed, double-click Launcher.exe on the CDROM using Explorer. 2 Click the Install Windows Media Player 10/11 button. 3 Follow the on-screen instructions. Depending on the OS of your computer, Windows Media® Player 11 or Windows Media® Player 10 will be installed. (If your computer is installed with Windows® XP Service Pack 2 or later, or Media Center Edition 2005 Rollup 2 or later, Windows Media® Player 11 will be installed. If your Windows® XP Service Pack or Media Center is an earlier version, Windows Media® Player 10 will be installed.) To close the installation menu, click the Close button. Charging the built-in battery/Connecting your computer and the gigabeat® To charge the battery, connect your gigabeat® to the computer with the USB cable. Also use the USB cable to transfer audio files or other media files to gigabeat® from a computer. Charge the built-in battery sufficiently before using your gigabeat® for the first time, or when the gigabeat® is used after a long period of non-operation. Charging times vary depending on factors such as status of the internal battery, ambient temperature, and performance of your computer's USB bus power supply. NOTE Be sure to install Windows Media® Player 11 or 10 on your computer first, or your gigabeat® will not be able to communicate with your computer properly.