Toshiba MW20FN1 Owners Manual - Page 20

Clock Setting, Auto Clock adjustment, To set Auto Clock to OFF

Page 20 highlights

Basic setup Clock setting The Auto Clock function will automatically set the built-in clock (Month, Day, Year and Time) when the unit is connected to an Antenna or Cable system and it is turned off. As the unit searches for a receivable station in your area and it receives a broadcast signal for Auto Clock, the Auto Clock needs several minutes to set itself. POWER DISPLAY 2,3 1,5 2,4 Auto Clock setting Preparation: • Connect the Antenna or Cable system. • If you use a cable box, turn it on. • Plug the AC Power cord to the AC outlet. 1 Make sure the unit is turned off. • If you press POWER, the Auto Clock POWER set is not effective. 2 Wait at least three minutes and press POWER. The POWER indicator will light. POWER POWER 3 Press DISPLAY to check the clock on the screen. DISPLAY TV/VCR 8 : 47AM MON STEREO SAP CH 125 00 : 00 : 00 SP 4 If the clock is not set, check the antenna condition. The Auto Clock may not function properly if the reception condition is not good. Auto Clock adjustment The Auto Clock adjustment will be performed at 12:00 PM everyday if you turn off the unit. • If you use a cable box and you want Auto Clock adjustment to be performed, the cable box must be left on. • The Auto Clock adjustment is not effective when there is a difference of more than 5 minutes exists between the built-in clock time and the actual time. To set Auto Clock to OFF When shipped from factory the AUTO CLOCK is set to "ON". But if you do not want Auto Clock set (Adjustment): 1 Press MENU. MENU SETUP M E N U TIMER REC SET TV SETUP CH SETUP AUTO REPEAT ON OFF SYSTEM SETUP 〈 / /ENTER/MENU〉 2 Press or to select "SYSTEM SETUP", then press ENTER. ENTER M E N U TIMER REC SET TV SETUP CH SETUP AUTO REPEAT ON OFF SYSTEM SETUP 〈 / /ENTER/MENU〉 3 Press or ENTER to select "AUTO CLOCK". SYSTEM SETUP CLOCK SET LANGUAGE/IDIOMA/LANGUE AUTO CLOCK ON OFF STANDARD TIME DAYLIGHT SAVING TIME 〈 / /ENTER/MENU〉 4 Press ENTER to select "OFF". ENTER SYSTEM SETUP CLOCK SET LANGUAGE/IDIOMA/LANGUE AUTO CLOCK ON OFF STANDARD TIME DAYLIGHT SAVING TIME 〈 / /ENTER/MENU〉 5 Press MENU repeatedly until the MENU screen is cleared. MENU SETUP • When the AUTO CLOCK is set to "OFF", the Auto Clock adjustment does not function. • Set the clock manually 22 . 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

20
Basic setup
SYSTEM
SETUP
CLOCK
SET
LANGUAGE/IDIOMA/LANGUE
AUTO CLOCK
ON
OFF
STANDARD
TIME
DAYLIGHT
SAVING
TIME
/
/ENTER/MENU
M E N U
TIMER REC SET
TV SETUP
CH SETUP
AUTO REPEAT
ON
OFF
SYSTEM
SETUP
/
/ENTER/MENU
Clock setting
The Auto Clock function will automatically set the built-in clock (Month,
Day, Year and Time) when the unit
is connected to an Antenna or Cable
system and it is turned off. As the unit searches for a receivable station
in your area and it receives a broadcast signal for Auto Clock, the Auto
Clock needs several minutes to set itself.
Preparation:
Connect the Antenna or Cable system.
If you use a cable box, turn it on.
Plug the AC Power cord to the AC outlet.
Auto Clock setting
Make sure the unit is turned off.
If you press
POWER
, the Auto Clock
set is not effective.
1
Wait at least three minutes and press POWER.
The POWER indicator will light.
2
Press DISPLAY to check the clock on the
screen.
3
If the clock is not set, check the antenna
condition. The Auto Clock may not function
properly if the reception condition is not
good.
4
Auto Clock adjustment
To set Auto Clock to OFF
POWER
POWER
DISPLAY
The Auto Clock adjustment will be performed at
12:00 PM everyday if you turn off the unit.
If you use a cable box and you want Auto Clock
adjustment to be performed, the cable box must be left
on.
The Auto Clock adjustment is not effective when there
is a difference of more than 5 minutes exists between
the built-in clock time and the actual time.
When shipped from factory the AUTO CLOCK is set to
ON
.
But if you do not want Auto Clock set (Adjustment):
Press MENU.
1
Press
or
to select
SYSTEM SETUP
,
then press ENTER.
2
Press
or
to select
AUTO CLOCK
.
3
Press ENTER to select
OFF
.
4
Press MENU repeatedly until the MENU
screen is cleared.
When the AUTO CLOCK is set to
OFF
, the Auto Clock adjustment
does not function.
Set the clock manually
22
.
5
POWER
2,3
DISPLAY
1,5
M E N U
TIMER REC SET
TV SETUP
CH SETUP
AUTO REPEAT
ON
OFF
SYSTEM
SETUP
/
/ENTER/MENU
ENTER
ENTER
SETUP
MENU
SETUP
MENU
2,4
SYSTEM
SETUP
CLOCK
SET
LANGUAGE/IDIOMA/LANGUE
AUTO CLOCK
ON
OFF
STANDARD
TIME
DAYLIGHT
SAVING
TIME
/
/ENTER/MENU
POWER
ENTER