Toshiba Magnia 3035R Detailed specs for Magnia 3035R - Page 7
Interrupt levels, Assigning PCI device IDs
View all Toshiba Magnia 3035R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
7 Interrupt levels IRQ Device 0 Interval timer 1 Keyboard buffer full 2 Cascade interrupt from slave PIC 3 Onboard serial port B (COM2) - Only for "Enabled" 4 Onboard serial port A (COM1) - Only for "Enabled" 5 Onboard network adapter, USB 6 Onboard floppy disk controller 7 Parallel port LPT1 (Only for "Enabled") 8 Real-time clock (RTC) 9 ACPI 10 Usable (may be used by the on-board SCSI controller, if RAID controller is mounted.) 11 Onboard SCSI controller (or RAID controller if mounted) 12 Onboard PS/2 mouse port 13 Math coprocessor 14 IDE controller 15 Usable (may be used by the on-board SCSI controller, if RAID controller is mounted.) Assigning PCI device IDs During setup of PCI expansion cards and system setup of each onboard PCI device, you will want to assign a unique device number to distinguish between devices that share the same name. The following table provides a list of available PCI slots, and device numbers of the onboard devices. Slot Bus number Device number Onboard SCSI controller 0 C Onboard network adapter 0 E PCI-5 (on riser) A1 4 1 The bus number changes to 2 or 3 depending on the device connected to the PCI bus 0.