Toshiba NB505 PLL50C Users Manual Canada; English - Page 94
Removing the battery pack, Power
View all Toshiba NB505 PLL50C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
NB500/NB505/NB520/NB525/NB550D/NB555D Series ■ Do not touch the battery release latch while holding the computer or the battery pack might fall out due to the unintentional release of the battery release latch and cause injuries. Removing the battery pack To remove a discharged battery, follow the steps as detailed below: 1. Save your work. 2. Turn the computer's power off - ensure that the Power indicator is off. 3. Remove all cables and peripherals that are connected to the computer. 4. Close the display panel and turn the computer upside down. 5. Slide the battery lock (1) into its ( ) position. 6. Slide and hold the battery release latch (2) to disengage the battery pack and then remove it from the computer (3). Figure 5-1 Releasing the battery pack 1 1 3 3 2 2 1. Battery lock 3. Battery pack 2. Battery release latch Installing the battery pack To install a battery pack, follow the steps as detailed below: Do not touch the battery release latch while holding the computer or the battery pack might fall out due to the unintentional release of the battery release latch and cause injuries. 1. Insert the battery pack as far as it will go into the computer. 2. Ensure that the battery pack is securely in place and the battery lock is in its lock ( ) position. 3. Turn your computer over. User's Manual 5-8