Toshiba P100 PSPA3C-SD402F Users Manual Canada; English - Page 168
Bluetooth, Monitor
View all Toshiba P100 PSPA3C-SD402F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Troubleshooting Bluetooth For more information on wireless communication, refer to Chapter 4, Operating Basics. Problem Cannot access Bluetooth device Procedure Make sure the computer's wireless communication switch is set to on. Make sure the Bluetooth Manager is running and the power to the Bluetooth device is turned on. Make sure no optional Bluetooth PC card and Bluetooth SD card are installed in the computer. The built-in Bluetooth function and an optional Bluetooth PC card cannot operate simultaneously. If problems persist, contact your dealer. Monitor Refer also to Chapter 8, Optional Devices, and to your monitor's documentation. Problem Procedure Monitor does not turn on Make sure that the external monitor's power switch is on. Confirm that the external monitor's power cable is plugged into a working power outlet. No display Display error occurs Monitor goes into panning mode Try adjusting the contrast and brightness controls on the external monitor. Press hotkeys Fn + F5 to change the display priority and make sure it is not set for the internal display. Check that the cable connecting the external monitor to the computer is attached firmly. If problems persist, contact your dealer. Check your monitor specification. It might not support selected resolution and refresh rate. The resolution on monitor might go into panning mode when wide screen resolution is selected. Refer to Appendix B, Display Modes. 9-18 User's Manual