Toshiba P47LHA Owners Manual - Page 24

Input signal selection and its contents This page can be displayed by using [Down] key while at the Main Menu page, appeared in page 21. This page is convenient to check the incoming resolution as indicated here as 1024x768@60Hz. "IGP" is indicating that the input signal is coming from Graphic card signal, as Input Graphic Processor. When Video signal is selected, "IVP", Input Video Processor will appear at lower portion indication. A Guide to Simple Problem Solving Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Symptom No picture Check these things Page 17 17 14 14 14 12 12 11 19 N/A Make sure the power cord is plugged in. Maybe the power is Off or Standby. Check whether the auxiliary equipment is connected. Check the input setting is correct. Signal may not be suitable. The remote control does not Make sure the battery is inserted matching the + and - marks of operate the battery compartment. The battery may be exhausted. Use the remote control aiming at the remote control sensor. The picture color is pale, or not Check the picture quality adjustment. clear If you are using YUV terminals, make sure cables are correctly connected. Factory default setting 24