Toshiba PA3542U-2PRP dynadock DVI User Manual - Page 14

dynadock™ 4. Plug the other end of the USB cable into an available USB 2.0 port on your computer. (Sample Illustration) Connecting the USB cable to your computer NOTE: Be sure to remember which USB port is used for the driver installation and always plug the dynadock into the same USB port, otherwise, Windows® will treat the dynadock as a new device and ask to install the drivers again. Only one dynadock can be operated on one PC at a time. 5. Connect your notebook computer to a power source and turn it on. For more information on connecting your computer to a power source, read the documentation for your computer. Installing the Drivers NOTE: The following installation steps are for both Windows Vista™ and Windows XP operating systems. Although most steps are similar, there are some differences between the two operating systems so please follow the steps for your operating system where indicated. 1. Insert the provided Installation CD into your optical disc drive. It will run automatically and the dialog box will appear. If the auto-run function is disabled on your system, the program will fail to load automatically. Please open the disk in explorer, and double click "AutoRun.exe". EN-14 (Sample Illustration) Initial Screen User's Manual